ENDGAME GEAR XM1 RGB Gaming Mouse - PMW3389 Sensor - RGB Lighting - 50 to 16,000 CPI - 5 Buttons - 60M Switches - Black

Product Information

Most likely they are using a somewhat large tau for robustness in debouncing, but an X close to 1 to minimize the introduced delay. That aside, the beta software is at least more fully-formed that the software that launched alongside the original XM1. Buttons can now be remapped to other functions, such as media controls or keyboard keys, while there is also a choice of lift off distance settings. Angle snapping can also be enabled or disabled, and up to five profiles can be configured and then saved to the mouse's on board memory. In accordance with the statutory provisions, PGW is solely liable for compensation of injuries to life, limb or health, for damages according to applicable product liability regulations and for damages caused by wilful intent or gross negligence on the part of PGW, whereby PGW shall not be liable for lost profits, indirect damages, consequential damages and claims third-party-claims. This Software may be subject to import and export control regulations of different countries. The User will comply with the applicable import and export control regulations of the Federal Republic of Germany, the European Union and the United States of America as well as all other relevant regulations. Resolution: up to 19000 CPI (steps of 50 CPI for 50 to 10000 CPI, steps of 100 CPI from 10000 to 19000 CPI; pre-defined: 400, 800 (default), 1600, 3200)

This End User License Agreement (hereinafter “Agreement”) is an agreement between you (hereinafter “User”) and the Pro Gamersware GmbH (hereinafter „PGW“), a German limited liability company with its main offices located at Gaußstraße 1, 10589 Berlin, Germany. Unless explicitly otherwise agreed, these terms and conditions apply exclusively. The User may terminate the Agreement by deleting the Software or by declaring the termination towards PGW.The rear of the mouse is home to the Endgame Gear logo which almost blends in with the plastic surrounding it, so it is easy to miss. Do note that this logo does not light up with RGB LEDs, and there is actually no RGB lighting on the mouse at all, aside from the DPI indicators on the underside of the mouse.

There are a couple more options on this screen, ripple control is a toggle for mouse smoothing, something you definitely do not want on. Since the XM1 already allows for CPI level and polling rate adjustment without any software, the software is kept very basic. It allows for button remapping (in theory, appears to be nonfunctional currently), CPI adjustment (four levels, in increments of 50), LOD adjustment (2mm or 3mm, the former being the default setting) and enabling or disabling ‘ripple control’. Likewise, the side buttons on the XM1r are a noticeable improvement over the XM1. Overall pre- and post-travel is similar, as they are using the same shell design, but the TTC switches in the XM1r are noticeably snappier and also tighter – the XM1 side buttons feel much looser in comparison. Before applying the grip tape, it is essential to clean your mouse to remove any dirt or oils that may interfere with the grip tape's adhesion. Use a soft cloth and rubbing alcohol to gently clean the surface of your mouse, taking care not to damage the coating. Make sure to remove all the dirt and oil residues, especially around the edges of your mouse.And why are all the new mice whining? It's like the industry's goal is to create new ridiculous issues. Likewise, using the same shape as the XM1 means I find the XM1r to be extraordinarily comfortable. I've actually been using the original XM1 since I first reviewed it for that very reason, even if other mice have come along since with a more flexible cable or newer sensor, the shape is just perfect for me. I love that the all of the areas that you grip don't have any holes in them, and that Xtrfy has also coated the internals to provide water and dust protection. The mouse creaks a little when held tightly, and the cable has frayed slightly where it rubbed on the sharp edge of a crummy mouse pad, but neither are genuine issues - I have zero qualms about the build quality here. The mouse can be configured entirely using on-board controls too, no software required. By default, you can adjust the lift-off distance, debounce delay and DPI setting, as well as customise everything about the lighting, from effect and colour to brightness and speed. This works nicely, and the key used for making most changes can be set as the F11 key afterwards so that it can be rebound to be used in games - handy! I don't think it matters. I've been testing ultra-light mice since May 2019 and I can't see any visible dust or dirt in even my oldest mice. I also haven't noticed any change in performance over time. If I do, I will update this article accordingly.

tldr: mouse are digital devices. using analog filters and analog reads works, i suppose, but really has no advantages over traditional methods with 0 press delay. so i don't see the point except for marketing to people who don't know better.

Precision Redefined

Le matériau utilisé pour la coque est excellent et ne se dégrade pas du tout au cours du temps. Il est assez facile de la nettoyer en plus. if you look at the pcb it's just an RC low pass filter on each switch. and i assume it uses the mcu's own adc to read an analog level. There's a new type of gaming mouse on the market: the ultra-light. These lightweight mice use honeycomb designs and other measures to cut mass wherever possible, making for a more manoeuvrable mouse that's easier to aim. Following the first releases by specialists like Glorious and Finalmouse, almost every major brand now has at least one ultra-light mice of their own with new sizes, shapes and features. Some of these mice even forgo the holey look, with internal modifications to bring weight down and an intact outer shell. After extensive testing of every ultra-light mouse in FPS games like Warzone 2.0, Valorant and CSGO, we're ready to make our recommendations. On peut changer ces presets avec leur application de configuration sous Windows puis utiliser ces presets n'importe quel ordinateur sous n'importe quel système d'exploitation.

Once you have your replacement mouse skates in hand, it's now time to remove your old ones from the base of the mouse. There are a few different methods to do this, but we’ll cover the main, most reliable method (in our opinion): The coating on the XM1 veers closer to a glossy feel, while looking matte in appearance. The mouse is a little bit of a clammier mouse, you can definitely see my fingerprints (oops) in a lot of my photos. If you tend to game warm in the hand, just be aware that the XM1 is on the warmer side, not as warm as pure glossy mice however. Le DPI est réglable par des sauts de 50. Ce qui est un plus pour les joueurs utilisant des DPI non communs. Il existe également d'autres options utiles : raw input, distance de décollage et autres. This Agreement and all disputes arising from or in connection with this Agreement are governed by the law of the Federal Republic of Germany. The provisions of the UN Sales Convention and the conflict-of-law rules are excluded.

Best ultra-light mouse 2023

If you're unfamiliar with Endgame Gear, the Berlin-based company was established in 2019 and so far has brought out three models of mice (XM1, XM1 RGB and XM1r), alongside some mousepads and a mouse bungee. All three of its mice are variations on the XM1 design, but it has proved quite popular amongst the mouse enthusiast community, so let's take a closer look at the XM1r. Compared to the Omrons in the XM1, the Kailh GM 8.0 switches definitely have more of a tactile bump, with the Omron's feeling a touch softer and slightly mushier (though only slightly.) The GM 8.0 switches have also been pre-sorted by Endgame Gear to reduce tolerances, so these offer a 55-60gf actuation, so that's a maximum of 5gf variation between switches. That results in both primary buttons having a very uniform feel, with no noticeable variation between the two. The low weight of only 82 grams and the especially large skates allow the mouse to glide undisturbed. The low-friction glides prevent fatigue and help to permanently maintain high pointer accuracy. This ensures maximum precision and speed with every movement.