About this deal
Always do a test area before starting any project to assess product suitability and final finish. Always follow the manufacturer's instructions on the tin. Many wood species contain water-soluble coloured extractives ( eg Larch ) which may leach out naturally when weathered. Weathered, bare wood surfaces can be refreshed with Osmo Wood Reviver Power-gel. Ready to use. Do not thin. Stir well before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. Always start out by testing an inconspicuous area to ensure you’re happy with the result and that the wood and product are a good match.
Wood is a natural material, the cell structure, similar to our skin, can take on and release moisture, it breathes. To ensure that this exchange is not prevented we have created finishes especially suited to the character of the wood.
Add to basket
The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. Pressure impregnated wood, Massaranduba, Bangkirai or Garapa need to weather off for at least 3 months.
Apply the first coat to all sides before installation. A trial application is always required, especially for unfamiliar surfaces.The driver must have assistance to offload unless alternative arrangements made with our transport team Osmo Bangkirai Oilis based on vegetable oils. These natural ingredients penetrate into the timber, keeping it flexible and healthy and preventing drying or brittleness. Wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser).