Joined in 2023 
82 
63 About this deal
When the volume is high, this system can produce noise levels that could permanently damage your hearing. YU4 is a self-powered speaker system. Do not connect the speaker terminals to the speaker intputs of a stereo amplifier. Damage may occur. Use only the power cord provided with the speakers. Connecting Audio Sources The Edifier R1280DB is a Bluetooth 5.0 speaker made for audiophiles. It comes with high-end components, the latest Bluetooth version, and plenty of inputs (optical audio, coaxial and line-in inputs). You can connect to different inputs simultaneously and use the source feature to swap inputs. Prosonic BT30 Active Bluetooth Bookshelf Speaker
Qualcomm aptX is a product of Qualcomm Technologies International, Ltd. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission. Kanto YU4 has external dimensions of (Height x Width x Depth) 8.7 x 5.5 x 7.5inch (220.0 x 140.0 x 190.0mm ).One of the predecessors of the YU4 is the YU, a Bluetooth 4.2-powered bookshelf speaker system that offers impressive sound thanks to its silk-dome tweeter and Kevlar drivers. YU4 features a high quality DAC (digital-to-analog converter) for the optical inputs that supports data streams up to 24-bit/96 kHz resolution. Ensure that the balance setting on the source is centered. Some sources may not have an adjustable balance setting. Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance. Verify that the speaker wire is connected to the same color terminals on the active speaker and passive speaker. YU4 is equipped with a RCA connector to provide output signal to a powered subwoofer. Simply connect a single RCA cable from the SUB OUT connection on the YU4 to the AUDIO INPUT on your subwoofer. If your subwoofer has a stereo L/R RCA input, either input will work. Reconnect the speaker wire between the active speaker and passive speaker and ensure the ends of the speaker wire are fastened securely through the binding posts.
Set the bass and treble levels to the default setting by pressing the EQ reset button on the remote. When using AUX with a PC, reduce the volume of the speakers and increase the PC volume. Also try connecting the speaker ground terminal to the PC chassis ground if noise persists. Home AV Direct is one of the UK’s leading specialist for Home & Personal entertainment. Visit our amazing showroom in Hayes, West London to view, touch and listen to our Hifi and Surround sound display’s.
Kanto YU4 comes with a handheld remote which is obviously very useful to control your powered speakers from a distance. Ensure that the rear of the speaker is spaced away from the wall by at least 8 inches, allowing the rear port function to be left unimpeded. While the speaker can be paired with more than one device, only one device can play and transmit audio signal at a time. Take your desktop setup to the next level by connecting YU4 to your computer via the RCA, AUX or Optical TOSLINK inputs.If your turntable does not have a built in Phono Pre-Amp, use the "Phono" setting on the Phono switch. Push the knob to select an input source - it cycles through the following inputs depending on what input source was last used. The space between the two speakers and the distance from the listener is important. If the speakers are positioned too close or too far apart, stereo imaging will not be fully developed.
Great Deal 
New Comment