NEBO Slyde King Flashlight & Work Light

Product Information

If you calculate the loss of light, with the numbers above, you see that both the Highest output and Lowest output had a loss of 61%. This is a lot, but quite normal on focusable flashlights. Press and hold: ramping brightness up and down. It will blink at the highest and lowest output, but if you keep pressing the switch, it just continues ramping up and down If you’re traveling and need to charge your Nebo flashlight, you can use a car adapter to plug it into your vehicle’s cigarette lighter. To charge the flashlight using a car adapter: If you don’t have a micro USB connector, you can also use a standard USB port to charge the Nebo flashlight. To charge the flashlight using a standard USB port: It would have been nice to have some more battery level indicators. Having only 1 indicator for 100% to 25% is not very handy. I’d rather have more battery levels, like 100-75% 75-50% 50-25% 25-10% 10-5% <5%

I also measured it between 20-30% from the outer ring of the beam, and it dropped to 7000K. The yellowish ring on the outside of the beam is about 4500K. The Nebo flashlight will start charging automatically. The LED indicator light on the side of the flashlight will turn blue when it is charging and turn off when it is fully charged. Precautions: The torch has a white LED with a convex lens which has been upgraded to emit 2000 lumens from the highest brightness setting, while the concealed work light located on the side uses COB LED technology to provide a maximum 500 lumens output. It offers a 4x zoom which can be adjusted from flood to spot by twisting the head of the torch. Make sure your power bank is fully charged before using it to charge the Nebo flashlight. If your power bank isn’t fully charged, it will not be able to charge the flashlight. When the Nebo flashlight is fully charged, unplug the USB cable from both the flashlight and the USB port. Precautions:

Customer reviews

The user interface on this light is very easy to understand. But there are a few things that you wouldn’t know unless you read the manual.. but since real men don’t read manuals, better pay attention now. Now that you have access to the inside of the flashlight, you can examine it for any damage. For example, if your Nebo was dropped or scraped against something, scratches or dents might be visible. Connect the micro USB connector on the car adapter to the micro USB connector on the Nebo flashlight. Only use the Nebo flashlight with a standard USB cable. Do not use any other type of USB cable with the flashlight, as this could damage the battery or the flashlight. To prevent your Nebo from being damaged, please do NOT try these steps if you are not comfortable opening up a flashlight.

The Lowest output starts at around 190 lumens, drops to 148 lumens in 30 seconds, and 66 lumens in 1 minute. It’s interesting to note that the light drops in steps, and not gradually. That’s kind of hard to tell in this graph, because the measurements are done every 5 seconds. You’d have to look at the 10 minutes graph to see this. The runtime is supposed to be 10% of the initial 30 seconds reading, so that means about 6.6 lumens. That’s about 16 hours. At 17h06min the light finally turns off. To clean this area, take a cotton swab or facial tissue and dip it into rubbing alcohol (it’s okay if you don’t have to rub alcohol; water will do in a pinch). Then wipe down both ends of the battery compartment to remove residue from old batteries. The last thing that could cause your light not to work is a loose wire or broken connection. To fix this, you will need to take your flashlight apart. If your flashlight is waterproof, don’t open it underwater or allow the electronics to get wet.The NEBO Slyde King 2K is the upgraded version of the popular Slyde King, which is a rechargeable multi-functional unit capable of being used as a torch or work light. To ensure your Nebo flashlight lasts as long as possible, always remember to turn it off when you’re not using it. To turn on your Nebo flashlight, simply unscrew the tail cap and insert the battery with the positive end facing up. Then, replace the tail cap. To turn off your flashlight, loosen the tail cap and remove the battery. How Do You Know When a Rechargeable Flashlight Is Fully Charged?