Ubiquiti UAP-AC-IW Unifi AP-AC-IW IN WALL Access Point - (Enterprise Computing > Wireless Networking)

Product Information

You may choose to restrict the collection or use of your personal information in the following ways: Unifi UAP-AC-IW คุณสามารถสั่งซื้อและติดตั้งได้อย่างง่ายดาย อย่าพลาดโอกาสที่จะเพิ่มประสิทธิภาพในการใช้งานอินเตอร์เน็ตไร้สายในพื้นที่ของคุณ

IMPORTANT: The UAP-AC-IW-PRO requires a UniFi Switch with PoE for power. Passive PoE adapters are not recommended.Dual band, 802.11ac Wave 1 access point with a 2+ Gbps aggregate throughput rate that can be plugged into a standard wall outlet.

Wi-Fi 802.11ac คุณสามารถเชื่อมต่ออุปกรณ์อิเล็กทรอนิกส์หลาย ๆ ตัวของคุณให้สามารถใช้งานอินเตอร์เน็ตไร้สายได้อย่างรวดเร็วและมีความน่าเชื่อถือ ไม่ว่าจะเป็นสมาร์ทโฟน, แท็บเล็ต, คอมพิวเตอร์โน้ตบุ๊ค หรืออุปกรณ์อื่น ๆ To specify which AP and which band was being used, I used the settings offered in the UniFi network controller or Instant On portal, and swapped them in and out as needed. I then stepped through the different channel widths and bands, letting the connection stabilize before beginning my tests.Looks like some of their APs are going EoL 1 March 2021, which means that any controller versions later than this will not allow you to configure the equipment. The range difference between the U6-Lite/U6-Pro and the U6-LR is large enough that it could be the difference between needing one or two APs to cover an area. In some situations one U6-LR is better, in others two lower-power APs may be better. It is hard to make general conclusions.

The U6-Pro has the best 2.4 GHz performance, due to it being the only model tested with Wi-Fi 6 support. 5 GHz performance depends on a lot of factors, but the AC-HD, U6-LR and U6-Pro performed the best overall. I don’t have a reliable way to test multi-client performance yet, but they should also offer the most performance in multi-client tests and realistic use. Devices will lose controller support in a controller version that is released AFTER the EOL date, and it will be clearly announced in release notes. In other words, it should be clear to the user before the upgrade happens, that the upgrade will terminate support. PoE+ input is required to use PoE passthrough. Connect this port to a UniFi Switch with PoE that is connected to your LAN and DHCP server.GHz signals extend this circle out a bit, but with a few walls in the way, getting low SNR links and slow performance is likely. If there is clear line of sight AP range can extend much further, but every wall imposes a dBm penalty. Wall material and quantity are usually more important than distance in a home or small business network.