FireAngel FA3313 Carbon Monoxide Detector and Alarm with 1 Year Replaceable Batteries (Replacement for FireAngel CO-9B)

Product Information

With intelligent CO sensing technology and built-in features including sleep easy function, silence and alarm memory, this alarm will keep residents protected from carbon monoxide.

With the alarm memory function, the red LED will flash to provide a visual indication of a previous CO alarm activation. https://www.fireangel.co.uk/wp-content/uploads/2022/10/MA0394R1-FireAngel-CO-Icon-Guide-Blog-Assets-Identifier-Guide-Draft-1_Power-Nightime-Sensing.mp4 Also note that carbon monoxide has been proven to spread into neighbouring properties through open windows and, in semi-detached or terrace houses, through loft spaces. If your property has an attached garage with a connecting door through to the house, it is recommended to fit a CO alarm inside the house leading from that doorway. Simple testing, quieter volume. Residents have convenience of the quiet self-test function for regular, discreet testing at a reduced noise level. Discover more. How many CO alarms are needed for a property? If your alarm is not a sealed battery alarm, then install the batteries following the steps within the manual.

All features

Combined smoke & CO alarms or mains-powered CO alarms are typically installed on the ceiling and should be at least 30cm away from any wall, light fitting, or other obstruction. Find out more about the FA3820-EUX10 CO Alarm. FA3313-EUX10: Carbon Monoxide Alarm with 1 year replaceable batteries

For alarms located in the same room as a fuel-burning appliance (for both wall and ceiling mounted alarms) the following applies: Do not install CO alarms within 3 metres of doors or windows, above radiators, or immediately close to anything that gives off steam or fumes like a cooker or shower room. Similarly, it is not recommended to install detectors in dusty areas such as workshops or garages.With low level CO monitoring, a pre-alarm warning to open windows helps reduce the risk of CO poisoning and prevents build-up of dangerous CO levels. If a room is not ventilated and ppm levels continue to increase, the alarm will activate.

The below provides an overview of installing your carbon monoxide alarm, but please refer to each alarm’s manual for tailored guidance. Which room can I install this carbon monoxide alarm?Night sensing lowers the brightness of alarm’s heartbeat sensor and automatically activates ‘sleep easy’ mode, allowing residents to silence low battery chirps for 8 hours, up to 10 times. The alarm’s high sensitivity mode will be enabled if the alarm predicts CO levels will increase to or above 180ppm for fast reaction to rising CO levels. Once your CO alarm is activated and tested, choose to install the alarm by mounting on a wall or free standing on a shelf. Your alarm should be placed 1-3 metres away from any fuel burning appliance in your home, in living rooms or bedrooms. With a multi-functional LCD digital display and array of exclusive features such as Alarm Memory, Ventilate Instruction and Environmental Sensing, the FA3322-EUX10 offers the highest level of CO detection for a property. Tenants can experience both audible and visual safety warnings with the digital screen, which displays temperature reading in standby mode and highlights dangerous temperature and humidity conditions to encourage intervention. The display also changes colour to indicate various warnings to residents for clear safety advice. To activate a new CO alarm, pull the disabling tab out of the device and wait up to 1 minute for the green LED to flash to confirm the alarm is active. For the FA3328 only; activate the device by

Once your CO alarm is activated, this icon or ‘heartbeat’ will continue to flash a green LED in power mode. If a battery fault or warning has been silenced for a period of 8 hours and times out during night time, the silence period will automatically be extended once for a further 8 hours (night silence will increase the counter by 1 for sleep easy). Please note, this feature is not available with the FA3820 or FA3313 alarms. Understanding FA3322 digital display indicators Alarms located in sleeping rooms and in rooms without a fuel-burning appliance should be located relatively close to the breathing zone of the occupants. Our FA3322-EUX10 Digital Display Carbon Monoxide Alarm comes with a sealed, tamper proof battery that will last the lifetime of the alarm. The sensors within the unit will deteriorate after 10 years, so to ensure you’re protected we recommend you replace the unit after this time. Near an appliance: they should be placed within 1 to 3 metres horizontally from the appliance and between the height of the appliance to 150mm below the ceiling – i.e., not above a stove where it would be in the path of steam or fumes.Carbon monoxide alarms in rooms with sloped ceilings should be located at the high side of the room. Ideally, an alarm should be installed in every room containing a fuel-burning appliance and every sleeping room. Additional alarms may be installed to ensure that adequate warning is given for occupants in other rooms, in which they spend considerable time whilst awake and from which they may not be able to hear an alarm in another part of the property. Please note, only the sealed battery CO alarms, including the FA3820, FA3322 and FA3328, are suitable for homes in Scotland under the new fire and CO regulations. Remove the disabling clip by pulling it out of the alarm and retain the disabling tab for future use. Kitemarked to BS EN 50291-1: 2018 (domestic use) & BS EN 50291-2: 2019 (camping / caravans / boats)