Wilton B.A.S.H 36" Sledge Hammer, 20 Lb Head (22036)

Product Information

Sledgehammers are some of the most common tools used in construction, demolition, landscaping and other physical type of work. If you’re working a job that requires physical labor, at some point you’ll probably need a sledge hammer. Demolition Post mauls are similar to sledgehammers in shape, but are meant to drive wooden fence posts or tree stakes into the earth. Newer mauls have broad, flat circular faces that are significantly larger in diameter than the body of the head (where the handle attaches). Older post mauls are significantly larger than sledgehammers like their newer counterparts except the outside diameter (body) of older post maul designs remained the same large diameter as that of the faces of the hammer from one side to the other side. Sledgehammers usually have octagonal faces that are the same diameter or slightly smaller than the body of the head, and they are not nearly as large in overall diameter as a post maul. pounds: Sledgehammer heads that are between eight and 12 pounds take on a more traditional sledgehammer look that includes a long handle and large head. These sledgehammers are useful for heavy-duty household projects like removing walls or breaking up concrete. Our top recommendation for a lightweight, traditional-sized sledgehammer is the Craftsman Eight-Pound Sledge Hammer. They come in two basic designs flat head or spiked. Flat is better for all around demolition work while a spike is better for penetrating into a slab or masonry wall.

20 lbs. Head 36 in. Bash Sledge Hammer - The Home Depot 20 lbs. Head 36 in. Bash Sledge Hammer - The Home Depot

Sledge hammers come in a variety of designs which make them more effective at specific jobs. The most common design is a flat head that weight between 6 to 22 pounds mounted on a 36 inch shaft. But the shaft length, head design and head weight can vary based on the job you’re doing. Before using a sledgehammer, you must be comfortable with the weight and feel of the tool. If the sledgehammer feels too heavy, or you feel out-of-control while using it, stop immediately. If you’re new to using a sledgehammer, follow these steps on how to swing your heavy-duty tool the right way.

Drilling hammer [ edit ] A man cutting a paving stone using a drilling hammer to drive a chisel Drilling hammer Both are prone to break near the head on a bad hit, and when that happens wood handles are easier and cheaper to replace. Fiberglass is a new material that’s intended to replace wood. It’s strong and flexible but doesn’t have the same feel as a wood handle. Tips For Minimizing Injury: To minimize the risk of injury when using a sledgehammer, you should always use the right tool for the job. Sledge hammers come in a variety of sizes and designs. Use one that’s appropriate for the job you’re doing. Always use proper technique when swinging the hammer, and avoid over-exertion. Be aware of your surroundings at all time. Clear the area of any potential hazards before using the sledgehammer. These are some of the most common types of specialty sledgehammers, but there are other variations and specialized types available. Each type of sledge hammer has its own design intended for a specific use. How To Safely Use A Sledgehammer

20 lbs. Sledge Hammer 84-577 - The Home Depot Bon Tool 36 in. 20 lbs. Sledge Hammer 84-577 - The Home Depot

Sledgehammers also come with a shorter handle and a lighter head ranging from 2 to 8 lbs. They don;t generate as much force as a full size sledge hammer but hit much harder than a standard hammer. They’re great for demolition work in smaller spaces when you don;t have the room to take a big swing. Find sources: "Sledgehammer"– news · newspapers · books · scholar · JSTOR ( September 2022) ( Learn how and when to remove this template message) A sledghammer is a demolition tool featuring a very heavy metal head mounted to a long light weight shaft. It’s designed to be swung which produces a lot of force. Learning to use a sledgehammer safely is very important because they can cause significant injury to yourself or others.Setting Forms: Sledgehammers are used for setting and building forms for poured concrete. A sledgehammer can be used to level and tamp the forms in preparation for pouring concrete or to help build new forms. Position your feet based on the type of swing you need. If you’re going to swing the hammer vertically, stand with your feet shoulder-width apart directly in front of the target. For a diagonal swing, stagger your feet with your non-dominant foot in front and a dominant foot behind you. Another use of sledgehammers is for driving railroad spikes into wooden sleepers during rail construction. When the two ends of the Union Pacific railroad were joined at Promontory, Utah, Leland Stanford hammered a golden spike into a sleeper with a silver hammer. [4] Sledges used to drive spikes for rails had curved heads [ citation needed] that came down to a "beak" that was only about one inch across. The shape meant that drivers needed to be accurate, and spot where the spike hit was often not much larger than a small coin, as anything larger would hit the plate or the sleeper. The curved head kept the handle away from the rail, as the spikes were driven with the rail between the spike and the driver. These are often called spike mauls.

Sledge Hammers - Bunnings Australia Sledge Hammers - Bunnings Australia

Setting Posts: A sledgehammer is the best tool for setting metal fence posts deep into the ground. These posts can then be used to support a wire welded fence. This section needs additional citations for verification. Please help improve this article by adding citations to reliable sourcesin this section. Unsourced material may be challenged and removed. Our top recommendation for a steel-handled sledgehammer is the Wilton B.A.S.H 20-Pound Sledge Hammer, whose durable, rubber-coated steel handle minimizes vibrations while increasing control. WeightThe sledge hammer is one of the most common hand tools used in construction and demolition work. The weight of its heavy metal head paired with a long handle creates a substantial force when hitting the target.

Sledge Hammer 16lb | Toolstation Estwing Sledge Hammer 16lb | Toolstation

pounds: Heads that are 20 or more pounds are designed for heavy-duty and professional use. These sledgehammers can be identified by their large head and long handle and are effective in driving rebar and shattering stone or concrete. The handle can range from 50 centimetres (1ft 8in) to a full 1 metre (3ft 3in) long, depending on the mass of the head. [3] The head mass is usually 1 to 9 kilograms (2.2 to 19.8lb). Modern heavy duty sledgehammers come with 10-to-20-pound (4.5–9.1kg) heads. Sledgehammers usually require two hands and a swinging motion involving the entire torso, in contrast to smaller hammers used for driving in nails. The combination of a long swinging range, and heavy head, increases the force of the resulting impact. Splitting Maul: A splitting maul is a type of sledgehammer that’s specifically designed for splitting wood. It has a heavy head with a sharp edge on one side, which is used to split logs into firewood. It also has a pointed end on the other side, which can be used for driving stakes. Wood is the traditional material used as a sledge hammer handle and my favorite choice. It’s very strong but soft and flexible which makes hard impacts easier on your hands. Sledge hammers and other farm tools have been made with wood handles for centuries and they’ve always been very effective and reliable.

Summary: What Is A Sledgehammer Used For?

Engineer Hammer: An engineer hammer, also known as a rail road spike maul, is a type of sledgehammer that’s specifically designed for driving railroad spikes. It has a long handle and a large, heavy head that’s used to drive spikes into railroad ties. A sledgehammer is a standard tool used in construction work even if you’re not doing much demolition.