Performore 40 Pack Z Table Top Fasteners with Screws, Heavy Duty Z Table Top Fasteners Solid Steel with Black Screws

Product Information

Also notice that I’m marking the inner side of the rails. Doing this will hide the fastener in the final piece. Wooden buttons are used to attach tabletops on much high-end furniture. They’re very strong and exude an aura of fine craftsmanship. You can make a bunch at one time and save some for use on future projects. Install them in the same manner as Z-clips. A better option for attaching a table top when building a table is to use store-bought table top fasteners or DIY table top fasteners. Table top fasteners securely attach a table top to a base but allows the top to move freely during seasonal changes. Place the apron on the table top, insert a biscuit and slide the DIY fastener over the biscuit. Do not apply glue to the biscuit. The biscuit is what allows the table top to move during seasonal changes. Attach the fastener with a wood screw.

This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items.Button fasteners – As the tabletop expands and contracts, button fasteners are free to slide within the groove. Grooves can be made along the entire apron, or to be slightly longer than the button width. Easy to make and install, it allows movement in two directions (along the apron and perpendicular to it). One of the easiest options for attaching a table top to a furniture project is a figure 8 fastener. A Forstner bit is used to drill holes in the apron, and the figure 8 fastener is screwed to the apron. The top is then placed on the DIY table, and the top is attached with screws through the figure 8 fastener.

The DIY fasteners need to be wider than the biscuit, so I made marks every 2-½” on a scrap piece of 1×2. Then drew lines using a Kreg Multi-Mark to make sections.Notice I’m only marking on the short stretchers of the base. The purpose of these fasteners is to pivot to allow for seasonal wood movement, and the short stretchers are the best place to do that. Generally speaking, you’ll always want to install figure 8s on the stretchers that are perpendicular to the grain lines on the top, because that’s the direction most of the wood movement will occur. Metal table clips (Z fastener, S-shaped clips) – Z-fasteners are a metal version of the button fasteners. It is an inexpensive and easy to install, and allows for a great deal of wood movement. We have prepared a 3D view and 2D drawings to make it easier for you to understand how each of the methods really works. Using a miter saw, I cut the sections apart. It’s not critical that the DIY fasteners are the same width, so just use the lines you drew as a guide for cutting. On the underside of the base, drill each hole for the screw, then elongate the holes in the direction perpendicular to the grain.