Nushine Silver Plating Solution 100ml - Permanently Plate Pure Silver onto Worn Silver, Brass, Copper and Bronze (eco Friendly Formula)

Product Information

Silver plating solution is for plating and re-plating silver and other base metals that contains copper content, allowing you to completely restore your dull looking pieces!The unique formula (formerly called Sheffco Silver Solution but now re-branded as Walsh Silver Plating Solution using the same formula and made in the UK). This advanced, unique produc t is more than just a silver polish. It not only cleans tarnish from your old, tired and worn silver and silver-plated articles; it instantaneously replates a layer of pure silver onto heavily worn silver, brass, copper and bronze - permanently! Top choice among professionals; it's well established in the UK, Europe and globally for over 25 years. No. The plating is a molecular reaction which bonds the silver particles to the metal. You will not notice a visible layer, as you would with paint for instance, but you will seethe colour of the metaltransform. The finish will depend on the texture of the metal you apply it to - so a textured metal will keep its texture. Will it make polish the metal from matt to a high shine?

This advanced, eco-friendly and unique product is more than just a silver polish. It not only cleans tarnish from your old, tired and worn out silver and silver-plated articles; it instantaneously replates a layer of pure silver onto heavily worn silver and base metals. Convert brass, copper and bronze into silver plated items - permanently! There were threads discussing it with comments similar to yours here...but the reality was...while certainly the chem plater provides a result which is thinner than an electroplate...it was not 'easily worn off' in reality. Nushine Silver Plating Solution - permanently plate PURE SILVER onto worn silver, brass, copper and bronze (eco friendly formula) Description Apply with a clean soft cloth or cotton wool to the area to be cleaned or plated and rub firmly for 15 to 20 secondsFirst pic shows the original colour, 2nd pic is half the foot done, 3rd pic is after treating it completely. They are ready for next Christmas! I have used the 'silver-plating' polishes for many years. The results are equal to your understanding of how to use it and the quality of the substrate (IOW how clean is the brass). I have used it on instruments, mostly as touch-up to silver or silver plating but mostly on silver-plated mouthpieces. I take exception to the notion that it will not continue to build up because I've had to discontinue using it on certain parts of a valuable mouthpiece because it was filling in the maker's marks. I also don't use it on facings except for maybe one application for the same reason - build-up that will alter the facing. Repeat as necessary. Not so happy with your first go? Don’t worry. Simply repeat the steps above until you achieve the desired outcome.

The solution contains pure silver and a thin layer is transferred on application to the metal. The bond is at bio molecular level and converts brass, copper or bronze into silver plated items permanently. It isn't terrible...I got some decent results on some horns, but there were also some instances where the plater just did not 'take' well to the bare brass on some patients, resulting in just a slight silvery sheen to the bare brass....this despite me prepping all the horns in the same way. This advanced product is much more than a silver polish. It not only cleans tarnish from old, tired and worn out silver or silver-plated articles; it instantaneously re-plates a thin layer of pure silver onto heavily worn silver where the base metal is Brass, Copper or Bronze. Apply with a clean soft cloth/cotton wool to the area to be cleaned or plated and rub firmly for 15 to 20 seconds Now you know which tools and equipment to collect, it’s time to run through how to silver plate jewellery using silver plating solution, step by step:

A cover for your table or jewellery workbench . Much like the protective gloves, you may want to use a cover for your workspace to avoid any staining from the solution. If you want to return items that were bought more than 30 days ago, we may still accept the item but there may be an administrative charge and exclusions do apply, e.g. if the bullion has been cut to some requirements. However, please call our customer service team on 0345 100 1122 or [email protected] It would be technically possible to do a whole sax with it and while this would require disassembly, it would in no way require an overhaul or repad. What it would require is many hours of tedious work and lots of product, which is not cheap. I could see doing a trumpet with it which would still be laborious but nothing like fighting the intricacies of a sax and its sharp needle springs. As long as it isn’t opened, the silver plating solution doesn’t have a shelf life. Once opened, however, it depends on how much you have used and therefore how much air is in the bottle - air will slowly cause the solution to dry out. Having said that, members of staff here have bottles which have been open and used for 3+ years which are still going strong! Is silver plating solutionthe same as electroplating? I ask only because, Hamilton House silver secret....which since covid apparently no longer exists....was a very good spot-chemical plating solution. It worked well in 75% of the cases I ever used it, and I had used it probably on a good 2 dozen horns.