Sika Sikabond 5500s Parquet and Wood Floor Adhesive | Solvent Based Rigid Adhesive for Wood Block and Engineered Wood Flooring - 16kg

Product Information

Floor may be walked on sanded & finished approximately 48 hours after installation depending on climatic conditions, the Sika® AcouBond®-System: solid wood boards (tongued and grooved), 3-ply engineered wood as well as chip boards can all be bonded; concrete/cement screed: must be clean, dry, contaminat free and thoroughly cleaned with industrial vacuum cleaner; To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

full surface bonding with SikaBond® Dispenser-5400 / -3600 / -1800: solid and engineered wood floors (strips, longstrips, planks, panels, boards), mosaic parquet, industrial parquet, lam parquet as well as chip boards can all be bonded; Must be ground and thoroughly cleaned with industrial vacuum cleaner and Primed with Sika Primer MB or SikaBond ® 5500S diluted 1 – 1 with Thinner EG. Anhydrite screed / Anhydrite flowable screed: Must be ground and thoroughly cleaned with industrial vacuum cleaner and Primed with Sika Primer MB or SikaBond 5500 S diluted 1 - 1 with Thinner EG.

Sikabond 5500S Rigid wood flooring adhesive

The substrate must be clean and dry, homogeneous, even, free from grease, dust and loose particles. Paint, cement laitance and other poorly adhering particles must be removed. Standard construction rules must be observed. Must be clean, dry, contaminant free and thoroughly cleaned with industrial vacuum cleaner.Anhydrite screed / Anhydrite flowable screed:

Sikabond 5500s can be used with a slight amount of bitumen residue on concrete floors but the more of this that is removed the better the Adhesion.If, according to wood floor suppliers or producers deviation from the standards is permissible, temperatures between 5°C and 35°C must be observed for the adhesive. to 1.2 kg per meter square depending upon size of notched trowel used and subfloor surface profile.

full surface bonding: solid and engineered wood floors - (strips, longstrips, planks, panels, boards), mosaic parquet, industrial parquet, lam parquet, wood paving (residential) as well as chip boards can all be fully bonded; Avoid getting adhesive on the side of the wood elelemns. Fresh, uncured adhesive remaining on the wood floor surface must be removed immediately with a clean cloth and if necessary cleaned with Sika Remover -208. Test wood floor surfaces for compatibility with Sika Cleaner 208 before use. Underfloor Heating: After thorough preparation and commissioning of the heating system, the entire floor area must be primed using a mixture of 1 part SikaBond 5500 S to 1 part Sika Thinner EG (by Volume). Roller apply and allow to cure. reduces stress to the substrate: the elastic adhesive reduces stress transfer between the wood floor and the substrate; The laying instructions of the wood floor manufacturer as well as standard construction rule must be observerd.

Substrate Quality: Clean and dry, homogeneous, even, free from grease, dust and loose particles. Paint, cement laitance and other poorly adhering particles must be removed. Standard construction rules must be observed.