Dremel 566 Tile Cutting Kit, Accessory Set with Cutting Guide and Spiral Cutting Bit for Precision Cuts in Wall Tiles

Product Information

Use Plunge Cuts to create holes for electrical outlets on wall tiles. Using a Right Angle Attachment makes this task easier. A Dremel is quite versatile, and yes, it can cut tile as well. But you should use the correct type of blade to make the cut. Most importantly, you must use a diamond wheel when cutting tile. Ceramic and porcelain tiles are hard and diamond being harder than them will cut through the material.

Safety is paramount when working with power tools such as a Dremel, particularly when cutting hard materials like tiles. There will be a lot of fine dust particles generated when you cut the tile and spinning wheel could potentially send small fragments flying, so be sure that your safety gear is on properly. Once the grinding attachment is securely in place, gently run it along the cut edges of your tile. This will help to smooth any rough edges and corners that your original cut created. You can mark all the tiles that you want to cut first before going to the next step or follow the steps one tile at a time; it is your choice. 2. Clamping Tile to Surface By taking the time to smooth your edges, you not only make your tiles safer to handle but also give them a more professional, finished appearance.Keep in mind that the Dremel is best used for cutting ceramic tiles. Tiles made of porcelain can be cut as well, but it will take longer, and it is better use a dedicated tile saw for this task. If you are cutting porcelain or similar materials, consider using another more powerful cutting tool. How to Cut Tiles with a Dremel? Practice First: If you’re new to using a Dremel for tile cutting, try practicing on an old or spare tile first. This gives you a chance to familiarize yourself with the process without risking any of your project tiles. Cleaning Up: After you’ve finished cutting, remember to clean your Dremel thoroughly with a shop vac. Tile cutting can leave dust and tiny fragments that may affect the performance of your Dremel tool over time. The process of cutting tiles with a Dremel requires careful preparation, setting the correct tool speed, and proper cooling of the cutting wheel to prevent overheating.

Now that you have made the lines, the next step is securing the tile to the bench. It is recommended that you use rubber clamps as they can hold the tile firmly without marking or breaking the tile itself. If you do not have rubber clamps, place some tissue between the tile and clamp so that no marks are made.

Similar products

Ensuring personal safety is extremely important during the process, and after cutting the tile edges should be smoothed with a grinding attachment. You are now ready to attach the diamond cutting wheel. The diamonds make the wheel hard enough to either edge or plunge cut into the tile with relative ease. Another benefit is that the wheel is thin enough that you are not removing that much material with each cut.