Dr Boat Heavy Duty Repair Kit for Boat Kayak, Canoe, Tent, Inflatables, Swimming Pool, Hot Tub - LIQUID PATCH Resistant to Fresh and Salt Water UV-Resistant Long-lasting - 40ML

Product Information

Heavy Duty Repair Kit for Boat Kayak Canoe Tent Inflatables Swimming Pool Hot Tub LIQUID PATCH Resistant to Fresh and Salt water, UV-resistant, long-lasting Adhesive-Sealant DR. Place a smooth sided heavy weight on the patch and allow to 'cure' for 24 hours before re- inflating the tubes to check that the repair has been successful and before re-launching the boat.

Dr Boat Heavy Duty Repair Kit for Boat Kayak,Tent, Canoe

Small tears/punctures can be repaired with a single patch to the outside of the tube, larger tears must be repaired by affixing a patch both inside and on the outside of the tube. For Hypalon patches only - Abrade the back of the patch, together with the marked repair area on the tube with abrasive paper to achieve a 'key' for the adhesive. After 15 - 30 minutes (depending on the ambient temperature), re-apply a thick layer of glue-sealant. Repair and sealing of punctures and cuts in inflatable products made of PVC, PU and rubberized fabrics.Liquid Patch is Elastic, Durable and more secure comparing to traditional repair methods Great for repairing punctures and cuts for boats, awnings, swimming pools, mattresses, boots, gymnastic balls and so on Heavy Duty Formula Suitable For Professional use: Sailing and Water Sports; Hot Tub Repair; Gym Equipment Repair. Leave to dry for at least 20 minutes, apply a second coat leaving it to dry for 2 minutes or until tacky. g. you have a ‘slow puncture’, then apply soapy water to the inflated tube and observe any bubbles forming at the puncture. Place around the damage (puncture or cut) - preferably at least 20 mm in each direction -clean from dirt and dust and wipe with a swab dipped in a solvent to remove grease.

DR BOAT LIQUID Patch Glue Repair Kit Hot Tub Boat Kayak

The place of damage must be fixed from the movement of the edges of the puncture or cut by any improvised means. g. piece of shaped hardwood or screwdriver handle), working from the centre of the patch outwards to smooth out any air bubbles and ensure good contact. Adhesives and solvents produce fumes which can be damaging to your health when inhaled, absorbed through the skin/eyes or ingested. Cut a fabric patch (two if the tear is greater than 50mm) with rounded corners, allowing a minimum 5cm overlap around the hole/tear.Boat is specially designed for sealing seams, repair and sealing punctures and cuts in inflatable products made from PVC, PU and rubberized fabrics Open the tube with glue-sealant and apply a thick layer to the damage site, grasping the areas 10 - 15 mm around the damage. Open the tube with glue-sealant and apply a thick layer to the damage site, grasping the areas 10 - 15 mm around the damage. Mask around the repair area on the tube with removable masking tape to prevent unsightly adhesive ‘overspill’ when applying the adhesive. Using a brush applicator apply an even thin coat of adhesive to both the back of the external tube patch and the masked repair area. Item: 145120386021 DR BOAT Liquid Patch Glue Repair Kit Hot Tub Boat Kayak Swimming Pool Tent 330ML.

Repair Your PVC or Hypalon RIB How to Professionally Repair Your PVC or Hypalon RIB

How to identify the fabric of your RIB, inflatable boat, dinghy, life raft or inflatable kayak collar, tube or sponson. Insert the rolled-up, polythene covered, repair patch into the tube through the tear or cut in the tube. It is recommended for repair of inflatable boats, mattresses, water attractions, trampolines, swimming pools, as well as frame products made of PVC fabric (awnings, tents). The type of fabric determines the type of adhesive, solvent and patch fabric that is required to undertake the repair.UV Resistant, Salt and Fresh Water Resistant, Durable Long Lasting Repair Solution for Hard To Reach Repairs: Dr. It is important to remove any excess adhesive as if this remains on the surface of your tubes it will turn an unsightly brown! Allow a 2-3mm gap around the pencil/removable marker line to allow for some stretch in the patch when applied. Clean/prime the back of the patch and the repair area, using a clean dry lint-free cloth, by wiping with MEK solvent or acetone.

Boat Repair Kit with PVC Patches Set Accessory for VGEBY 3Pcs Boat Repair Kit with PVC Patches Set Accessory for

B. as adhesives are ‘contact’ adhesives then it is important to position the patch correctly as it will not be possible to re- position once in place).

Item: 125901754467 Dr Boat Heavy Duty Repair Kit for Boat Kayak, Canoe, Tent, Inflatables, Swimming. Boat is a composition based on polyurethane for the repair and sealing of punctures or cuts in inflatable products made of PVC fabric and rubberized fabric without the use of trays. If the tear is greater than 50mm then, using a brush, apply a thin, even coat of adhesive to the back of one of the patches and to the inner tube surface around the repair area.