Clearwater Hot Tub, Pool and Spa Test Strips x 25 - 3 in 1 - Measures Chlorine, PH and Total Alkalinity

Product Information

The amount of pH decreaser you need to add to your hot tub depends on levels are and on the volume of water. Dosages are only approximate and the effect of chemicals on your water can vary each time you use them, depending on the exact amount of water in your hot tub, water type, water temperature, positioning of hot tub etc. Use the test strips to check chemical levels everyday, the filter pump should be left on for a minimum of 4 hours a day when there is water in the pool.

Spa Water PH Test Strips (Pack of 25) | Homebase Spa Water PH Test Strips (Pack of 25) | Homebase

Make sure that any outdoor storage of chemicals is as far away from your hot tub as possible and in a dry, covered area.Before you want to use your Lay-Z-Spa, make sure hot tub chemicals are balanced to maintain clean and healthy water. The chemical dispenser slowly releases the mini-tablets into the water, making this a completely hassle-free way of treating your water even for the user with a busy schedule. Bacteria Control – ClearWater Stabilised Chlorine Granules are used to disinfect the pool water and keep it free from bacteria, some of which may be hazardous to health. Because of this,the only way to be sure that there is chlorine present in the water is to test regularly. Remove the cover from Lay-Z-Spa to allow evaporation of the chlorine (keep the filter running constantly).

Test Strips (100 Test Strips) - Lay-Z-Spa ClearWater® Dip Test Strips (100 Test Strips) - Lay-Z-Spa

All dosage and application recommendations below are based on ClearWater® hot tub chemicals and you should always refer to the instructions and warnings included with each product before using. Untested water can develop a chemical imbalance which may result in an unhygienic swimming environment or skin irritations. At this stage the water is unlikely to have much chlorine (if any),so to avoid algae and bacteria from the start add a “shock” or starter dose of ClearWater Stabilised Chlorine Granules. The number of bathers, water hardness and other outside materials such as mud, grass, and leaves will all affect chemical requirements.Dip a ClearWater® Test Strip in the centre of your Lay‑Z‑Spa, remove and hold it still for 15 seconds. Chemicals react poorly when in contact with sunshine and heat and require a dark, cool environment to control for any potential reactions.