Parrot MKi9200 Hands-Free Car Kit

Product Information

The MKi automatically synchronize the names and phone numbers in your mobile with their phonebooks and update theirs phonebooks each time a new entry is detected. When users get in their car, they start the engine and the kit immediately connects to their mobile phone. Thanks to the voice recognition feature, drivers say a name and the kit automatically dials the number. The MKi series offer the widest compatibility with existing and future Bluetooth mobile phones, thanks to its full compatibility with the Bluetooth wireless communication protocol. Had a Parrot Mki9200 for years never any issues with any of my iphones always has worked. Currently running Firmware 2.20

Parrot Bluetooth Handsfree Pairing Codes - JustCarKits Parrot Bluetooth Handsfree Pairing Codes - JustCarKits

If for some reason you do not have the accessory cables (USB, iPod 30 pin and Aux cable) then you cannot update the firmware. Benefits of the Update My wifes iPhone X works fine on my parrot. I’ve tried my work Samsung phone worked ok, as well as two of my friends iPhones also and all connects and pairs fine for phone calls, bluetooth audio and shows as a paired device. My old iPhone 7 same iOS worked fine also.. I’ve tried my phone on another Parrot MKi9200 and that worked ok too and I can connect just fine which makes things stranger. The car is a ’02 Jaguar XKR and I wired the Parrot up myself. As stated above, it worked with the old BlueBox SW_3.x fine. Last week my iphone7 went to be swapped due to a fault and since then the new one won’t pair with the Parrot correctly. It will say Telephone connected on the Parrot screen, on the iPhone it will look like it has paired but if I look on the Parrot it won’t show as a paired device and will only be able to be used for phone calls not media.Turn on ignition and wait approx 30 seconds for the kit to turn on. Press and hold for 2 to 3 seconds the RED and GREEN buttons on the remote at the SAME TIME. You will hear “Memory Erasing in Progress”, after which the MKi9000 will re-boot. After it has powered up again, press the centre button to select English (or other language by rotating jog wheel) as the required language. It will then re-boot once more. Proceed to Stage 2.

Parrot MKi9200 Update File V1.96 ENGLISH only - JustCarKits Parrot MKi9200 Update File V1.96 ENGLISH only - JustCarKits

The Parrot MKi9200 Bluetooth Car Kit connects to your car audio system and delivers high quality conversations whatever the conditions are. The Parrot MKi9200 Bluetooth Car Kit is delivered with an independent RF remote control. Positioned on the steering wheel or placed wherever is convenient the remote control gives you the total control you need right at your fingertips. The Parrot MKi9200 Bluetooth Car Kit proposes an incredibly efficient combination of an external double microphone and new software which eliminate environmental and in-car noises with full-duplex and zero-echo crystal clear conversations.The Parrot MKi9100 is a Bluetooth hands-free system compatible with all vehicle* makes and which works with all mobile phone brands. Hi, not sure if this is the right place to post this but I had an issue with a MKI9200 V3 blue box where the Mic stopped working. Everything else worked fine. Tried a new Mic still no sound so I got another Blue box. This one was a bit older V2 with V 2.11 firmware on it. I just connected it up to the existing cables and did a factory reset and all good except for one issue. The MKi9200 will now re-boot. Please note that sometimes it will refuse to erase memory. Simply turn off the MKi9200 and try again. Please note that the remote control MUST be able to be used with the MKi9200. If the remote does not work you will not be able to reset the MKi9200. All MKi remotes contain a CR2032 battery and it is common for people to forget to change them – they typically last a year to 18 months in normal use. Different software versions of Parrot MKi9200’s may operate slightly differently. If you have a Version 2 control box you can update this to the latest version for that version – V2.20