Trimming Shop Button Hole Elastic Tape Stretchable Cord for Trouser Waistbands, Maternity Clothes, Sewing, Knitting, Crafting (5 Metres Long, 25mm Wide, Black)

Product Information

Mark the area that is to have looped buttonholes. Measure the size of the loop in conjunction with the button it should loop over, and then measure the space to set the loops along the opening edge. Buttonhole loops can be seen on cuffs too.

The foundation of the loop is made with between four to eight strands of thread sewn in the space where the loop will be used. Mark two buttonholes each 1” away from the first belt loop on the front on either side of the zipper. Cut bias fabric strips on a 45 o angle in matching fabric or contrast if you prefer. Cutting on the bias (diagonal) gives the loop some stretch to go over the buttons. Further Reading: How to Sew Spaghetti Straps ( this will show you several ways to turn a narrow tube of fabric)

More Sewing Techniques

Hand-stitched button loop closures are more delicate than the fabric variety and can be used in the same way as a decorative feature, or as a little utility closure on a simple opening. Remove any pins or temporary stitching. Then press open and fold under the facing. The loops will now be exposed at the edge of the facing, ready to loop over their corresponding buttons. Button Loops Helpful Hints for Fabric Button Loops Buttonhole elastic is a specialty elastic. It has small holes in the center of the elastic. When worn, you can use a button to anchor the elastic in place. It’s a brilliant little notion for growing kids! There is no need to feel a bit ‘loopy’ at the thought of mastering sewing loops. Button loops are an easy and professional look that is much easier than buttonholes. More Button Tutorials

As you’re sewing and get to a belt loop, use your finger to move the loop out of the way. Sew as far as you can, then lift the presser foot and slide the loop under the presser foot. Hair elastics and thin hat elastic make great loops as they are covered and stretchy, but they are not quite as elegant as a fabric loop made from the material used for the garment. We reserve the right to change the delivery service used due to weight, volume and location; however this should only typically be a service enhancement. If DPD 2 day is selected and paid for, then this option will always be used.

Turning Button Loops Using a Needle - Using the needle threaded double with a strong thread, knot the end and sew through one side of the fabric. Insert the needle through the tube until you come out at the other end. Gently pull on the thread so the tube turns the right way out. Once you get the top started, the rest is quite easy. Sew the strands so they make a loop at the edge of the fabric, leaving enough space for the loop to slip over the button or little pearl bead you may have chosen for added delicate design. Turning Button Loops with String - Before you sew the seam, stitch a piece of wool or string at one end. The string must be longer than the fabric so it pokes out at one end. When the long seam has been sewn, trim the excess fabric and gently pull the string to turn the tube the right way out.

Place the ready-made loops with the looped edge facing inwards on the opening on the right side of the fabric. Turn the fabric to the right side out by using the large-eyed needle, a sewing bodkin, or a loop turner. They all work on the same principle as they pull the fabric through from the top of the loop and out at the end of the loop. Pin the fabric and remember this is fabric cut on the bias, so pulling too much will stretch the fabric and cause a rippled effect. Step 3 - Stitch the Loops Shorten the stitch length on your machine and start about ½ inch (12mm) from the end so you avoid having the fabric gobbled by your machine. Start by making your own fabric loops. This is a bit of a fiddly process, but worth the effort for a tailored-looking fabric loop effect. Best of all, it will match perfectly to your the dress or top. Step 1 - Cut Bias StripsIf for some reason you can’t open up the waistband to reveal the waistband’s inside, go ahead and remove the waistband entirely. Mark the buttonholes Cut the strips 1 ¾ inches (4.5cm) wide and at least 4 inches (10cm). If you are making several loops it is more practical to make one long strip of the loop to cut up according to your needs. Step 2 - Fold the Fabric Button Loops The threads can be pulled through the ready stitched facing as you push and pull a needle and thread at the right point on the garment to make the loop. Step 2 - Blanket Stitches Start sewing at the required seam width and watch the folded side of the loop as you gently feed it through the machine. This will help you see that there are no unwanted wrinkles or ripples.

Get as close as you can to your last stitch, then keep on stitching to reattach the waistband. Sew on the buttons Button loops vary in size enormously. Here button loop closures have been made larger to thread the ribbon through. This is a common technique used in wedding gowns. Button Loops Used to Thread Ribbon How to Make Button Loops, Step by Step Instructions 1. Fabric Button Loops Now you have your loop turned to the right side. Make sure the seam is at the edge pf the loop and press to flatten. Now you are ready to set the loops in place. Step 7 - Marking Button Loop Positions If you want to, cut through any belt loops on the bottom of the waistband. There’s no need to remove any stitches holding belt loops in place on the top of the waistband. This will anchor the elastic in place and keep the elastic from falling out in the wash. Gather up the elasticUsing the same thread, sew a series of blanket stitches along the strands of the loop. This gives the loop strength and a neat finish so it can slide over the button and hold fast while the garment is being worn. Fuse the interfacing in place. You can almost get away with not using interfacing if you’re working with denim. With other types of pants, go for the interfacing. In this post, I’ll show you how to deconstruct a waistband, add buttonholes, and then we’ll work on adding elastic to a jeans waistband. Sew on the buttons about 1/2” closer to center front on the inside waistband. Be sure as you stitch that you’re only going through one layer of fabric. Adding the buttonhole elastic This is a different kind of elastic waistband than what you usually see. Buttonhole elastic lets you adjust everything to fit which lets you get a much better Adding elastic to jeans waistband Deconstruct the waistband