Silverline Mini Pipe Bender 6 - 10mm (MS129)

Product Information

Let’s be honest. There’s a tonne of rubbish on the market right now. Where there’s a top brand offering premium products, there’s a “copy” flogging absolute junk for half the price. And let’s face it, two separate guides just mean you have two more things to lose, and two more things you’ve got to find in your van every morning. lighter in the hand than a combi. The Monument combi weighs more than 4kg; the XV weighs 1.5kg; the XXII weighs 2.3kg Place the Lever Arm over the positioned pipe and place the Lever Hook onto the Pivot Pins, ensure the Nylon Guide is seated. If you’re working with microbore, unfortunately, there isn’t a set from Hilmore currently available in the UK.

We posed this question through the Tooltalk App (see all the answers in the app available for iOS or Android AOS). The 2600K includes 15mm and 22mm aluminium guides. These guides are available as spares;15mm 2601N and 22mm 2603T. These guides also fit Irwin® and Hilmor® GLM. Mark the pipe where you want start of the bend. Position the pipe in the Former under the Retaining Hook. Position the start of bend vertically in line with the Pivot Pin.There are some benders specifically suited to smaller pipe (8mm/10mm for instance), and we’ll cover those later. A. Pipe wall size is a lot thinner than it used to be, plus the pipe bender former could be stiff (Answered by D S plumbing and heating on 26 Jan 2021)

The 15mm/22mm guides on the Hilmor copper pipe benders are integrated. No swapping out when you change the size pipe you’re bending, and nothing to lose. We have also designed bending arm extension handles to increase the leverage for bending both 15mm 22mm copper pipe. These short threaded extension handles code 1224M fit both the 15mm XV XVE & XVL and 22mm XXII versions. One or more extension handles can be added for additional leverage. The Monument 2600K 15mm and 22mm is a best selling pipe bender. These are available in Monument brand widely available across the UK from plumbers merchants and e-tailers MON2600 2600K, Instinct® brand INST2600 from PHG independent plumbers merchants and also from UKPS plumbers merchants including Plumbase under Entity® brand ENT2600. When initially launched on the UK market Monument ensured that the hook stop was redesigned so as to not mark the pipe. It is well documented that soldered fittings and compression fittings interrupt the flow of water around a heating system. Bending of copper pipe ensures unrestricted flow of water and can also create attractive, crafted finishes on installations.XV is much smaller than a combi; arm length is 40cm compared to a combi arm length of 65cm. Note the 15mm XVL & 22mm XXII arm lengths are about 60cm The 15mm 22mm pipe bender or tube bender is an essential part of the toolkit for any heating or plumbing engineer. throating occurs on testing with the XV, XVE (XVL) XXII, XXIIE as well as Monument 2600K and a Hilmor® GLM We have included bending angles of 30 45 60 and 90 degrees on the XV and XVL 15mm versions and an additional 75 degree angle on the 22mm version; these are easily visible on the Former of each bender.

Before you remove the pipe from the Former, view your bend angle; remove the pipe if it is correct, or if necessary, reapply the Lever Arm and increase the bend angle. Frequently Asked Questions FAQs Buy the Monument Bender Single Sized – 1215K-XV 1315- XVE (1315Longarm-XVL) 1222G-XXII 1322Extended-XXIIEHowever, as microbore is notoriously weak, it’s not like you need anything heavy duty. #2 – Monument Mini Pipe Benders But when it comes to buying new ones, I guess it’s Silverline that stands out as the biggest contender to Hilmor. The price differential between Hilmor compared with Stanley and Rothenberger is just too small, and Hilmor offer so much more in terms of quality. better sight lines– as the bend is in the same plane as the Arms of the bender it is easier to line up by eye

We believe the 1215K-XV, the 1315XVE, the 1315Longarm-XVL, the 1222G-XXII and the 1322Extended-XXIIE are easier to use than a combi bender: When Monument look to design, manufacture and market a new product we look to create products which will save the engineer time. In this particular instance, we have designed a smaller and lighter weight pipe bender than the standard combination 15and 22mm hand bender. Monument have reengineered a design previously unseen on the UK market. The (launched in June 2020 ) pipe benders, 1215K XV 15mm Pipe Bender, the 1315XVE 15mm (1315Longarm XVL 15mm) , the 1222G XXII 22mm and the 1322Extended XXIIE 22mm Pipe Benders deliver force to bend the pipe in the same plane as the bend. The traditional combi bender such as the Hilmor ® GLM or Irwin ® GLM or Monument ® MON2600 are offset from the bending plane. The Monument Masters 1215K-XV, 1315-XVE, 1315Longarm-XVL , 1222G-XXII and 1322Extended-XXIIE create similar bend radiuses to a Monument 2600K combi bender; in fact the 1222G has a slightly tighter radius that the 2600K combi bender, as this radius is tighter it creates a slightly different profile on the outside of the bend when compared to a combi. So, why do we use the Hilmore GLM tube benders, when there’s quite obviously others around the same price, and even more on offer for much less.If you’re installing a whole run of heating/gas pipe, swapping out the guides is going to turn into a real bug-bear. If you’ve not used copper pipe benders before, you’ve probably never creased a pipe. It goes without saying creasing affecting the integrity of the pipe long term, and that’s a big no-no.