Ubiquiti Networks UAP-AC-LR 175.7 x 43.2 mm 2.4-5 GHz 802.11ac Dual-Radio Long Range - White

Product Information

AC-Lite: The do-everything workhorse. Unless you are trying to push gigabit speeds or have some really heavy wireless needs in mind, this is a good default option.

UniFi - Rethinking IT - Ubiquiti

Yes that sorted it , thanks. I set the transmit power on the Pro AP to medium, and now devices switch between access points more seamlessly. Bij Device setup (stap 4) ziet hij keurig mijn model UniFi-AP-AC-Mesh. Dus verbinding is ok lijt mij. Heb jij nog advies om verder door het configuratie menu te komen The UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralised controller.AC-nanoHD: Newer than the Pro, this is the cheapest 802.11ac Wave 2 access point they make. If you have modern devices that support multiple radio chains on 5 GHz, you can get some fast throughput. 2.4 GHz performance isn’t as strong as the Pro, however. For now, UniFi is still a good way to create a high performance network. More Wi-Fi 6 models are coming. I have not heard any rumors or seen anything confirming Wi-Fi 6E capable APs are coming soon, but I will update my current UniFi access point guide when that happens. Since you get to choose them individually, you might want to consider getting a few different models. If you want maximum performance in one area, you can have one Pro or HD covering that, and use AC-Lite’s or mesh APs to extend the network into less used areas. Alternatively, if you want to expand coverage in the future, you don’t need to match the AP’s you currently have. You can add any of them at any time, anywhere you need them. 802.11ac Wave 1 Vs. Wave 2 You can indeed connect your AC-Pro to the EdgeRouter ER-4, it will need a network cable from the route to the access point. To be clear, the ER-4 can’t power the access point. But with the ER-4 comes a Power over Ethernet (PoE) adapter. You can place the adapter near the router. Does the access point project my network if I don’t do anything other than plug it in to my lan (through the POE)? In other words, can I use it to function essentially as an extender without any configuration?

AC-LR - MICROVIEW NIGERIA UAP-AC-LR - MICROVIEW NIGERIA

You shouldn’t have to worry about the channels, just leave in on auto and the Unifi controller will work it out. But that isn’t your real problem. When a device connects to and wireless network but can’t access the internet and a few thing can be the issue: I just had a similar issue with an old iphone 4. What ended up working for me was creating a second wireless network where i set the ‘Combine Name/SSID’ field to off, so there was a different ssid for the 2.4 and 5ghz networks. The iphone was able to connect to that. Also, try to place the Access Point in the room where the wifi is used the most and at least 3 feet away from other appliances that send wireless signals at the same frequency (cordless phones and microwaves for example). Also, large metal objects (fireplaces, chimneys) tend to weaken the signal. Yes, that is correct. USG isn’t needed for the Unifi access points. But the cloud key is recommended. It will work without it, you could also install the Unifi controller on your notebook just for the setup. Only keep in mind that you might need to lower the transmit power. Be default it’s on auto and that is not ideal.Hi Ruud, thanks for the interesting article. I was wondering how you think about the fast roaming option? Should i enable it for better performance? Thanks for answering!

Ubiquiti UniFi UAP-AC-LR-5 Indoor Access Point (5 Pack) - 4Gon

You will only benefit from the Unifi NanoHD speed if you have a lot of users or transfer a lot of data. The multiple MIMO antenna will process data faster from a client. The MU-MIMO works only for 5Ghz clients, and the client itself also needs to support MU-MIMO (which most clients don’t support) The AC-HD is the top of the line for home networks, exceeded only by the UAP-SHD and UAP-XG. It offers the best speeds UniFi offers on 2.4 GHz and 5 GHz. It also features an antenna specifically designed for close cell spacing and vertical coverage, and dedicated hardware offload for QoS, Guest Control, and Client Management. I could not connect to these wifi networks (using samsung galaxy S9+ to test) so I disabled them in Unifi. Still, getting connected to the Basement AP is not possible on the main WIFI network (not a vlan). on other AP’s the S9+ is connected, but every few minutes it seems to disconnect and not to reconnect again, only manually.With VLANs you are separating the network, so it’s normal that you can’t access the controller in the LAN network from a device in VLAN10. I don’t have a guide about setting up vLAN yet, I will work on that coming weeks. This article is very important especially to the first time users. I find the parting shot very interesting.. Where the author says you have to disable the wifi on the primary router.. Since these devices were already installed by someone else, we have no idea what the account credentials are, if any. No, you will need to configure it. But you can use the Unifi App for it if you don’t want to install the controller.