DC to DC Step Up Converter 5V to 12V 10A 120W Boost Power Module Output Voltage Adjustable Circuit Board

Product Information

I was thinking of buying an ARGB Hub (5v3pin hub), and I'll have the said components connected to that - then will connect the 5v3pin hub to the Deepcool Converter > to my motherboard. So I got a converter, the deepcool. Thing is, it only converts 1 5v3pins into 12v for the motherboard, but I have multiple ARGB components shipped already (RGB Fan hub, RGB HSF, RGB m.2 heatsink, RGB Gpu support). Is this possible with the help of some generic parts (and not with the help of some expensive transformer, etc.)?

RGB convertor - DeepCool RGB convertor - DeepCool

If you’re looking to power your micro-controller based project or its associated peripherals, we would highly recommend procuring a DC to DC Step-Up module. Not only are they designed to occupy minimal space, but also many of these modules have adjustable output voltages, making them ideal for a wide range of applications.Soft start function (reduces current ripple and spikes during start-up, by limiting the initial current flow).

DC DC Converters | Electronic Components Distributor DigiKey

Correct. A 5v ARGB device (fan, LED strip, etc) plugged into a controller that only receives an 12V RGB and converts it to a 5V signal can ONLY display that single color. It is not able to display multiple colors like a normal ARGB connected device would. This design has a 22µF “output” capacitor. But I already have a 100µF capacitor as an “entry” to the A4988 stepper. PCB space is VERY limited for me. Can I just use the 100µF and drop the 22? You don't have permission to access "http://www.mouser.com/c/power/dc-dc-converters/isolated-dc-dc-converters/?" on this server. you can also buy an usb controller for your argb or manual controller of some sort. if you dont have an argb 5v header. Meeting power demands in modern day electronics is quite a challenge and there are times where we will not be able to supply sufficient voltage for our circuits. In that case we need to go for DC to DC boost converter circuits like these to step up the incoming voltage to a certain usable level. These kinds of step up converter circuits will be useful in Solar powered projects, Lighting systems, Battery powered projects and so. MT3608:

Documentation & Resources

ADD-RGB equipment can be compatible with 12V RGB motherboard via the convertor, to achieve synchronous lighting compatibility. regulation to make sure the output stays at 12V as long as the load consumption stays within the specs. As this is an Adjustable version of step up voltage regulator/ boost converter, we have to select the value of output voltage (here 12v) which is directly dependent on voltage determining resistors (here R5 and R6).