Teltonika RUT955 LTE 4G Router

Product Information

Time interval - configured with a start and an end value which define a window of time during which the Condition is considered as TRUE. e.g.:

Added the possibility to use 2gonly/3gonly/4gonly arguments for cellular service command alongside current 2g/3g/lte arguments Copies the state from the selected input and applies it to the selected output. This can be used instead of specifying a static state.

The number of seconds after which the broker should send a PING message to the client if no other messages have been exchanged in that time

Added the possibility to configure multiple reboot times in one Reboot Scheduler configuration instance Parameters that are to be included the Post/Get request. Select a parameter (right drop-down box) and enter a custom name for it (left text box). Added validation that prevents automatic connection to first unencrypted WiFi AP when using MULTI AP Delay and time parameters can be used together. For example, if delay is 10, time is 5, action is on, then 10 seconds after the execution of the command, the output will switch to on (or stay in on state if it was already that way), then after 5 more seconds it will switch to off state. In this case the overall command execution time is 15 seconds. SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protectionThe Input is used to create Input Rules. An Input Rule is triggered by a user-specified input state change. When this trigger occurs, the device executes a specified command if certain specified conditions are met (conditions are optional). the entire procedure may take a very long time and includes a reboot at the end; exact time will vary depending on the size of the MSD (larger size will take longer; for example, using a 128 GB drive will take about 2 hours to fully set up, while a 16 GB will only take about 5 minutes).