Joined in 2023 
82 
63 About this deal
If you look at the options on most nextbase they have a few timer options to shut down after power lost, I know on my 402 there was a 5 minute option, trouble is it would not last 5 minutes even after being fully charged driving for hours, it is normal for the cams to get warm, I have 5 nextbase in family, all rubbish constant problems, constant repairs, constantly unreliable the biggest problem is ?, BATTERIES, charging circuit cooks the batteries, I had 4 in a year Then the Dash Cam will be visible as a removable drive on your computer. If you go into My Computer (Windows) or Finder (Mac) you will be able to see the Dash Cam listed as a drive, usually called NEXTBASE. Does anyone know what the normal battery life would be on this cam as surely it should be greater than 3 minutes. Includes: 5V Mini USB power cable, 2 Amp ATO/C fuse (standard), 2 Amp ATM fuse (mini), Fuse tap table (standard), Fuse tap cable ATM (mini) and Ferrite core to remove electrical interference.Total Length = 5 metres. Tbh, I have my 402G hardwired into a permanent live circuit. I'm not sure whether or not this would help with battery life/reliability.
On the Dash Cam's screen you'll see a menu of 3 options. Please select 'Mass Storage' on the Dash Cam screen and then OK so that only that displays on the screen. Nextbase describe it as a "dash cam solution for new or experienced motorists who want instant upload capabilities to social media, or their insurer. Market leading thanks to its connective capabilities and ease of use, this new dawn for dash cams simply reinforces Nextbase's position as the most popular dash cam brand in the UK". It boasts many features such as GPS logging, WiFi, Smartphone Apps, a 2.7" LCD screen, G-sensor and 1080p recording. Remove the SD card and press the reset button on the underside of the dash cam. Then turn the Dash Cam on. Please turn Parking Mode off and turn Screen Saver off as these could interfere with the test results. https://cdn.nextbase.com/nextbase-en-gb/2018/06/NBDVR312GW-iN-CAR-CAM-Firmware-Release-R6.4-Ver.-B-R06.9-including-Instructions.zip The built-in G-sensor will allow the Dashcam to record any impacts or sudden course changes and the footage is automatically protected on the memory card. The built-in GPS allows for the vehicle's exact position and route to be recorded and a date and time stamp is also included in the recording to prevent any potential dispute in the event of an incident. However, you don't just have to rely on the G-sensor, you can also press a nice red button on the Dashcam to manually create a permanently saved event in a situation where something has happened in front of you.Plug your Dash Cam in. Ensure the cable is plugged directly into the dash cam and NOT via the mount. Please remember that after this test your Dash Cam will once again need charging as the battery will be flat.
Remove the SD card and press the reset button on the underside of the Dash Cam. Then turn the Dash Cam on. Please turn Parking Mode off and turn Screen Saver off as these could interfere with the test results. AT 60FPS/720P AT 60FPS HD RECORDING AND 140° WIDE VIEWING ANGLE - The 322GW has been designed to provide high quality, detailed images of your journey on the road with the 1080p/30fps and 720p/60fps F1.6 lens. The 140° wide viewing angle ensures that a wide coverage of the road ahead will be recorded for fantastic footage.Only negative we can really find is the video at night isn't the best from the selection that we've tested, it glares a bit with light however it's by no means poor and is common across them all - see our video. Unplug the power cable, turn the Dash Cam on and time how long the Dash Cam stays on for. The time it takes for the battery to drain will help us identify the root cause The battery will only receive charge when the iN-CAR CAM is connected to power, please reconnect the car adaptor and leave the iN-CAR CAM turned on.
Great Deal 
New Comment