Kreg Classic Face Clamp 76mm/3"

Product Information

A face clamp is made up of several parts that enable it to secure workpieces tightly and without damage. The jaw opening size, which is the maximum distance the jaws can separate. This determines how wide of an object the clamp can hold. Often, it's the same as the overall length, but not always. The face clamp is best employed in metalworking tasks such as welding and sheet metal fabrication, although it can also be used to clamp other materials like wood and plastic. The Handle: The handle of the face clamp is a long piece of metal that the user holds on to while clamping the workpiece in place. The handle is sometimes covered with latex to increase the grip. The handle of the face clamp is also responsible for joining all the parts of the clamp together.

What Is A Face Clamp? - Top Woodworking Advice What Is A Face Clamp? - Top Woodworking Advice

If you want a versatile clamp that works for many different types of projects, is large enough to handle even sizable pieces, and has enough clamping power to keep your project firmly in place for as long as you need, then look no further than the BESSEY 36-Inch Clutch-Style Bar Clamp But if you just want to add a few lightweight bar clamps to your collection without spending a bundle, then the WORKPRO 6-Piece Bar Clamp Set is perfect for your needs. What to Look for in a Woodworking Clamp Type The pressure that has been selected using the screw will be retained for some time by the clamp. The position of the screw on the clamp can vary depending on the model and make of the clamp. Most face clamps, however, have the pressure screw located at the end of the handle to provide easy rotation for the user. This light-to-moderate duty clamp is 36 inches long and has a 3.5-inch throat, which is the maximum depth of the jaws extending from its bar or frame. It exerts up to 1,100 pounds of clamping pressure, which is more than enough for most DIY projects. The clamp itself weighs 4.5 pounds which is a bit on the heavy side. However, it's a must-have for any carpentry or woodworking shop, whether professional or hobbyist. The face clamp comes in different sizes for different levels of clamping and these sizes are judged by certain factors, including:The clamps all provide up to 150 pounds of holding pressure. When used as spreaders, the 6-inch clamps extend up to 11-9/64 inches and the 12-inch clamps extend up to 17-21/64 inches. All of the clamps have a large, anti-skid gripping pad that won't mar the surface of the material being gripped. The Jaws: The jaws of the face clamp are long and curved pieces of metal that when brought together, form a C-shape. They have a stationary jaw, which remains fixed throughout the operation, and a moveable jaw, whose position can be adjusted. The Jaw Opening: The jaw opening can easily be defined as how far away the moveable jaw can move from the fixed jaw. This opening space or width between the ends of the two jaws is known as the jaw opening and it determines the clamp’s capacity.

Clamps - Appleby Woodturnings Kreg Pocket Hole Kits - Clamps - Appleby Woodturnings

The clamping faces are what set the face clamp apart from other forms of clamps as the clamping faces are very wide, ensuring the pressure is spread very thoroughly across the width of the workpiece. The width of the clamping faces also ensures that it can hold down large-sized workpieces relatively easy and can also be used to hold thin pieces in their grip. These parts include the two jaws, the pressure screw, an adjusting lever, clamping faces, and a handle. The sizes and some other factors of the clamp, however, depend on the model and make of the face clamp.The Pressure Screw: When the jaws of the face clamp are closed, the screw can then be used to adjust the amount of pressure that is released by the jaws and onto the workpiece. The clamp features a no-slip comfort grip, which improves your hold and protects against pinching. Both arm ends have oversized pads designed to spread out clamping pressure. We also supply 90° corner KHC-90DCC and the right angle KHC-RAC clamps.

Trend Pocket Hole Jig Face Clamp Clamping Tool with Trend Pocket Hole Jig Face Clamp Clamping Tool with

Every woodworker's tool box should have a few of these clamps, which come in handy for holding all sorts of pieces together while glue or other adhesives dry. It is also perfect for holding metal pieces in place while being welded or drilled, or for general-purpose clamping. The large swivel pad helps reduce the risk of damage to the surface of the material being clamped. You must first open the jaws of the clamp by pushing the lever away from the handle. This step will pull the moveable jaw away from the fixed jaw and creates the space needed for the workpiece to fit in. You will need to use at least two clamps for most projects, but the specific number of clamps to use will vary based on the size of what you're working on and the PSI required (largely based on the type of wood you're working on). There are at least 30 different types of clamps to offer various methods of applying pressure. The design of the clamp determines its type, while the material, manufacturer, and warranty of the clamp will impact its cost.

The Length: The length of the face clamp is variable and depends on the model of the clamp. But the length is measured as the distance from the edge of the jaw to the end of the handle. How To Use A Face Clamp. This article was written by Michelle Ullman, the tool expert for The Spruce. She has extensive experience not only in writing about all things related to the home, but also in carrying out various DIY projects, including landscaping, painting, flooring, wallpapering, furniture makeovers, and simple repairs around the house and yard.