Corsair Commander PRO Digital Fan And RGB Lighting Controller - Black

Product Information

I just received everything (commander XT and 2 SP120 pro) everything works as I hoped, except for the 2 fans I bought myself. The CoPro won't show you the power draw. You have to do the math. How many strips are you using and what size? Look them up, calculate the draw and see if it's under 2A (or 2000mA). As to the fuse thing, do you mean blowing a fuse inside the commander? My home's electric system? Power Supply? I'll assume CoPro for now, would that simply "break" the CoPro and leave the rest of the lighting hardware / PSU operational or risk cripling too. I did not have those problems with a configuration full of lightning hub, lightning nodes and pmw hubs, but it was quite a mess for cable management. NOTE: We recommend having someone assist you with this, as you will be required to keep holding down a button while connect and disconnecting a cable.

Second, you don't have any of temp sensors for the Commander Pro connected. Those are actually the best control sources for your fan curves. These can also be quite helpful in diagnosing any cooling issues. For example, put one on the radiator intake, put another just over the pump head and put a third one somewhere else in the case (hard to say where as we've no idea what case you have). I have the H100i V2 cooler, the Commander Pro, the RGB hub, 4 of the RGB strips and 5 of the LL 120 MM fans.With this info, would i be safe as to power draw? (System specs under profile are up to date, currently only drawing 160 in, 140W out)

Thanks Zotty, I'm interested on maximum current and how many fans that we can plug into this commander core with splitters. Use a paper clip or something similar to press the reset button; make sure you keep the button pressed. currently using the "Cobalt" profile from Corsair's "Lewis Gerschwitz". so do i need to calculate with spiral rainbow values or single color Corsair usually ships a hub when you buy a three-fan and yes, some of Corsair’s chassis does come with a hub similar to a commander.Both. I have 3 fans connected to one header with with a total current if 0.9A. That should not matter, I can do the same off a MB header no problems. So ... if you want some help with your heat problem, we need to have that information (as a start) to being to look at it. Same for the pumps, they will have to run at the same speed, so they can go on a simple 2 way PWM splitter After unboxing the Commander PRO, you’ll notice that it’s surprisingly compact. Measuring in at 133mm x 69mm x 15.5mm with a single internal USB 2.0 cable and SATA power cable.