Joined in 2023 
82 
63 About this deal
Before testing, make sure the battery terminals are really clean as grease and dust could lead to errors in the test results. Press "▲" or "▼" to select the "BATTERY TYPE" (specified on the battery rating label), then press "ENTER" to continue.
Like the BT300P, the cranking and charging tests will reveal any problems with your cranking or charging system. Like the other testers, your results include the battery voltage, internal resistance of the battery, and the current CCA value, as well as the state of health percentage. What are the best features of this tester? Capable of on-board and off-board battery detection without removing the battery from the car, which is an excellent feature for battery dealers and private car owners. The accuracy, reliability and longevity of the Digital Battery Analyzer (12V) tester may float your boat.
"+v+"
The 31.5 inch cable. Clearly listening to the needs of users, a nice long cable is handy. For those who have batteries in hard-to-get-to places, that’s ideal. This refers to the opposition to the flow of current within the battery cells. A 12V battery normally has 6 cells inside. Any Flooded (Wet), AGM batteries (any kind), Calcium (Ca-Ca), Gel, EFB, deep cycle battery will be fine.
This is a measure of the true health of a battery. You can use this to judge how much longer a battery will last.If the charging system has not been giving the battery enough charge, the battery will potentially have sulfationand may be storing less charge than normal and delivering less power.
It’s simple to use, the LCD screen is bright and unlike the Clean & Green Auto model, is colourful. We used these results and evaluations to give the 12V battery tester an overall rating. We weighted testing accuracy more heavily, since it’s likely to the most important factor for many people in deciding which tester to buy. CCA is huge. You’ll only need to investigate further if your vehicle of choice is a tank or some kind of colossal industrial vehicle. If so, you’ll need to investigate and make sure CCA is not above 2000. And 100CCA is very small, no car would have a battery with CCA below 100. What type of vehicles do they work with?
"+val.title+"
It does so by identifying the lowest voltage the battery can maintain while the starter motor is working. A voltage below 9.6 volts indicates a problem with your starting system. What does the Charging Test measure? State of Charge is simply the current level of energy in the battery at this particular moment. SoC can move up or down very easily by charging or discharging the battery. Voltage Type – We can distinguish between two types of battery testers, analog and digital. The former is the simplest model that simply show you the test results on a scale. Digital units usually display more information, including voltage, on a digital LCD screen. That’s by either 1) using a desulfator charger, like the CTEK’s MXS 10, or NOCO’s Genius 10 UK; or 2) by attaching a high quality battery desulfator to the battery, which will remove and constantly keep sulfation away.
DO NOT place the tester near the engine or exhaust pipe to avoid damage by high temperatures, when the car engine is running. Some of the lower cost testers on the market don’t measure Internal Resistance, for example, so this already places Topdon testers above them. The tester prompts the operator to "Increase RPM to 2500r/min and keep it 5 seconds". Press "ENTER" to get the test result:
"+y.name+"
The device will jump to main menu automatically after 3 seconds, select "BATTERY TEST" and then press "ENTER" to continue.
Great Deal 
New Comment