TCP Smart Wi-Fi LED IP65 Tapelight Extension Kit Colour Changing

Product Information

However, if you’re not sure about the power connections in your home and don’t get them serviced every season, then now might be a good time to call an expert. So, even if you’re using a dual-band router, there is a good chance that you’re only connecting to the 5.0 GHz network. If the lights do connect at this stage, you will know that the problem was with the 5.0 GHz band. From there, you can simply change the credentials for the 5.0 GHz network.

Using a dimmer switch can also cause your smart lights to behave like this. If the lights are not compatible with the dimmer, then you can’t make use of these systems with the dimmer switch. How do you connect two or multiple LED strip lights together? One way to connect different strips together is to solder them with wires. They are designed to make this process as easy as possible. How to connect LED strip lights to plug? You will need knowledge of plug wiring to be able to connect your driver to a plug. If you are unsure, consult a professional to make sure the connection is sound.

So, to narrow down on these errors, just reach out to a professional. He will take care of the power connections for you, and you won’t have to get through this error yourself. So, if you’re using a dimmer switch, it is highly recommended that you replace it with a regular switch and then try powering on your lights. How to install LED strip lights with a remote? Your strip lights may have a remote or be able to connect to a mobile app. The manufacturer will include instructions to guide you through connecting to your remote controller. How to connect the remote to LED strip lights? If your LED strip lights can be remote-controlled, the strips will need to be connected using a receiver between the LED tape and the driver. This will mean you can change colour temperatures or RGB colours with a remote or phone app.

So, if the reading on the voltmeter or the multimeter is not optimal, going with a different source is a better idea. You can then insert the ends of the tape, with the copper terminals exposed, into the fastening clips. However, if the lights are damaged, and you’re not sure about the hardware, then claim the warranty immediately. The warranty is valid for 12 months, and you can seek help from professionals to get a new one. If you want coloured lighting that’s easier to hide, then the range of Philips Hue Outdoor lights may make more sense for you.Most often than not, these issues are related to unstable voltage or a dimmer switch installed in your outlet. First of all, you should open up your Alexa app and go to the skill options. From there, you should remove the TCP smart skill and reboot your mobile phone once. Most of the time, the experience with these lights will be effortless but if you’re not too sure about the power status, then reaching out to a local electrician is a better idea. Since the TCP LED+ Outdoor Festoon Light uses Bluetooth, I had to be within range of the lights to control them. I’d have preferred a Wi-Fi connection, since this would extend range and allow the lights to work via Alexa, Google Assistant and IFTTT. Bluetooth devices can be internet connected if a gateway is available, but TCP doesn’t sell such a device. As it stands, the only way to take smart control is when you’re in your own home. Performance

One of the biggest appeals to LED strip lighting is its adaptability. By cutting strips you can continue your stream of light around corners. While it will depend on the brand you choose, most LED strips can be cut. Some will have a cutting line or scissor icon at each space where the lights can be safely cut without damaging the circuiting. These are generally earmarked by a pair of copper dots at the end of the LED. How Do You Cut Led Strip Lights? How to install LED strip lights in the kitchen? LED strip lights look most effective when the strip is hidden away and only the light shows through. This could be underneath shelves, cabinets or worktops for maximum effect. How to connect LED strip lights to the battery? You can connect to a battery by a driver installed between the LED strip lights and the power source. Make sure the polarity of the wires matches the battery for a complete connection. Simple to install, and offering great value, these outdoor lights are are fun addition to any garden. However, Wi-Fi over Bluetooth would have been better, and the bulbs are a touch ugly when turned off. Design and Features How to install RGB LED strip lights? RGB LED strip lights have the same installation process as a regular LED strip, but they may require more space depending on the width of the strip.

In This Article

There is simply no point in wasting your time with a defective device, and you’ll be able to grab a fresh piece by seeking help from professionals. One of the best things about LED strip lighting is that you do not have to be an electrician to install them. You can find starter kits that will provide you with everything you need to make the process as easy as possible. Always plan before you get started. Make sure the LED strips are the right length for the space and that you can reach your power source easily. LED Pro Line Strip Luminaire – 4′, 32W, 40K SKU: PSP4UZDA840K View Details View Spec Sheet Read more How do you install LED strip lights on the ceiling? To make the most of the lighting’s effect without showing the LED strip itself, try to place them behind a lip or groove. This will allow the light to fully brighten the space while keeping your decor looking neat and tidy. On the ceiling, try to attach it to the edge of a drop-down ceiling or at the edge of moulded carving.

Before you cut, always make sure the power is disconnected. It is important to cut a straight line, and not a diagonal as this will damage the connection and might result in the lights failing to work when you try to connect them to another strip. First, scrape the plastic cover off the end of your LED strip with a sharp knife or box cutter. This will expose the copper dots that you can connect two pieces together. Looking to install TCP lighting solutions in your smart home, go through these common issues to increase your understanding of these lights. LED strip lights are designed to make cutting easy, so all you will need is a pair of scissors. Either follow the cutting line (that sometimes also has a scissor icon on it) or cut between the pair of copper dots that show up at the end of each LED unit. Cutting anywhere else will potentially damage the circuitry and render your reel of lights useless.

The Latest From TCP

Lighting can make or break a space, and the same is as true outside as it is inside. While a set of festoon lights can make a garden look cool, wouldn’t it be better if those lights could colour change, too? With the TCP LED+ Outdoor Festoon Light, this is exactly what you get. To isolate the issue, we suggest that you turn off the 5.0 GHz channel for a brief period. From there, retry the connection with the TCP lighting.