Fiskars XSharp Axe and Knife Sharpener, Ceramic sharpening stone/Fiberglass reinforced plastic case, Black/Orange, 1000601

Product Information

When chopping with an axe, the axe must perform well; however, an axe with a dull blade should not be used to cut trees. Therefore, it is essential to knowhow to sharpen a Fiskars axeto get better results. I don’t fault Fiskars for this. It’s part of the deal with a flat grind design (which comes surprisingly sharp for the price). Sharpening is just part of the axe game. Common issues with the Fiskars axe edge

In the case of sharpening an axe, Fiskars needs more attention. The Fiskars axe is quite special compared to a normal axe. Fiskars axe does not support the DIY sharpening process that much. So, theFiskars axe sharpeneris the solution. What is the Process of Sharpening a Fiskars Axe? One of the best features of Fiskars axes is that you can basically store them anywhere. Shed, garage, the trunk of the car, and you won’t run into the same issues as a traditional axe. They can withstand temperature and humidity changes. I’ve found it can be awkward to try and sharpen the big axes higher up, and you get a less even or complete motion. I would end up just doing a bunch of partial strokes. The big axes are easiest to run fully through the sharpener if it’s lower to the ground and you are positioned above it.The Fiskars sharpener is an incredibly versatile tool because it can be used to sharpen both an axe and a knife. In addition, the Fiskars knife and axe sharpener are extremely simple to use.

If not corrected – the chip will be a weak point that is more likely to lead to additional breakage along the edge. It’s not a big deal, but there is a chance these metal bits can immediately cause damage or dulling again if they aren’t removed.

Field Testing The Sharpened Knives

File with the single cut side. Axe files will often have a single cut and double cut side – the single cut (straight lines) will be smoother and remove less material per stroke. The double cut side will criss-cross and is for aggressive material removal. Sharpening dull axe edges requires stones with grit. And the grit ranges from 1000 to 3000. So, whetstones with grits ranging from 4000 to 8000 grits are used to polish the knife and sharpen the sharpness. Technique Two: Fiskars Sharpener The wider angle will be stronger and more supported, withstanding more impacts without chipping or rolling. This wider second bevel won’t be as useful for tasks like carving, but that’s not really what Fiskars are good for anyway. It will still chop and split well. All axes will dull with use, and rolled edges can be quite common with flat ground edges (like on Fiskars).