UP100 10 Pieces Black Silicone Duckbill Valve One-Way Check Valve 25.5 x 17 x 24.5 MM for Liquid and Gas Backflow Prevent

Product Information

During the transportation process or the installation process, if workers did not deal well will cause surface damage.

Crane BS&U has no direct influence on, or take any responsibility for any working practices employed or depicted in any image(s). Viking Johnson (part of Crane BS&U) manufactures couplings, flange adaptors and associated fittings for the Utilities industries. Viking Johnson cannot make recommendations regarding the pipeline design, which includes all components, intended operational substances, introduced chemical species and materials. Any comments made by Viking Johnson regarding product compatibility apply only to Viking Johnson's product range. The engineered construction allows the valve to open with minimal pressure, and close against a rising tide with no requirement for a power source or manual operation.Position the valve in line with the pipe, lifting equipment may be required for large size models. The clamp(s) may need to be loosened for installation. Using a lubricant, it is recommended to lubricate the inside of the rubber where it will slide over the pipe end. This is to prevent the rubber from any damage during installation. From one-way valves used in automotive fuel pumps to delicate valves used in tubing circuits for heart surgery, for soap dispensers, coffee makers, anti- siphoning valves in shower heads, and toys. This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.

Our capabilities also include designing, assembling, and testing finished sub-assemblies, including Class VI thermoplastic housings with integral biocompatible elastomeric valves such as those found in: As pressure or flow increases, the lips open further, allowing more flow. This feature allows solids to pass unhindered with low pressure loss.Depends on the die-cutting tool: It needs to be sharp enough, so that it can cut the silicone thoroughly to invoid diecutting burrs, and to invoid the situation of "slit" doesn't close well. Neoprene is the best rubber for Ozone sunlight protection, and stops barnacle growth and sea weed build up. Vernay meets the needs of medical device and diagnostic equipment manufacturers by offering a variety of elastomeric fluid control options that provide your device with accurate and repeatable performance. These products are ready to be designed into your application, providing cost-effective, safe and reliable fluid handling. Vernay also provides test data and specifications to support your device qualification process. We offer a comprehensive range of biocompatible Silicones or Vernay Polyisoprene formulations for your fluid, gas, and media-based applications. We also have experience using other component materials such as: The slip on model, easily slips over the outside diameter of the pipe, and is clamped on with the clamp(s) supplied with the valve. This will securethe valve to the pipe. Ensure that the inside diameter of the pipe is measured, as the outside diameter of the valve needs to be slightly smaller so that it fits inside the pipe.

The original Tideflex design, the TF-2, has a flare on the top and bottom of the valve. It has been superseded by the TF-1 and has been standardised by many consultants and owners. The TF-1 allows installations in such structures and are easily retrofit to existing structures, often replacing failed flap gates, without the need for breaking up the concrete floor to provide bottom clearance.

Knowledge that flows from over 85 years of experience

The TF-1 can also be installed on the OD of elliptical pipe and many arch pipes. Tideflex Technologies also offers a thimble plate option allowing the slip-on TF-1 to be installed directly to a headwall or seawall. Measure the section of the valve that will fit onto the pipe, and mark on the pipe with a permanent marker a line where the valve will slide up to. This will ensure the valve is secured on at the right location.