Liqui Moly 7946 DPF Pressurized Tank Spray Gun 1 pc Carton

Product Information

Application: Please pay attention to the dosage instructions! Add to the diesel fuel tank before filling up. 375 ml are sufficient for 60 to 80 liters of diesel fuel. Regular use every 3 months is recommended. Any diesel car can be susceptible to soot build-up, especially those mainly driven around town or on short or low speed journeys. Regular DPF cleaning is the best way to avoid costly repairs. Fields of application: Suitable for all diesel engines with particle filter, can be mixed with all diesel fuels. The Launch DPF tool has many benefits including increased engine performance, reduction of smoke from the exhaust, increased fuel economy, a reduction in exhaust noise and, a free flowing DPF, which decreases warning light instances. Diesel Particle Filter Flushing Liquid solves and removes all soot deposition and residues. The Flushing Liquid cleans gently and can be used on all aluminum, magnesium, zinc and cadmium parts. The product can be used perfectly for the latest generation of particle filters.

We design and manufacture Engine Carbon Cleaning Machines, DPF cleaning fluid and other products to reduce engine carbon build up and lower emissions here in the UK. In addition to our R&D facility in Aberdeenshire we also have all the production there too. Furthermore we have a growing dealer network throughout the UK who enjoy the ease of use and reliability of our carbon cleaning equipment. Here at ECS we sell to trade customers like garages, mobile technicians and wholesale partners alike. ECS produce the best carbon cleaning for your business. ECS Ultimate DPF cleaning fluidThe DPF is a complex component and one that is costly to replace. Launch UK is keen to offer a cost-effective solution for drivers, helping them to reduce vehicle emissions and keep their car running and reliable, while keeping repair and maintenance bills low – important decision factors in the current climate. Diesel Particulate Filters (DPF) often gets clogged from soot due to extensive urban driving (low Cat temperature). Bluechem’s DPF Service is your solution. Here at ECS we offer our ECS DPF & Inlet cleaning gun. This high quality DPF cleaning gun comes with accessories required for proper DPF cleaning on all vehicles. You can use our ECS Ultimate DPF fluid with this product. Our DPF cleaning gun requires the use of an air compressor set to 4 – 5bar maximum pressure. In combination with our ECS Ultimate DPF cleaning fluid you will be able to carry out DPF cleaning with ease. Our gun now comes with our trademarked logo laser etched for a cool look. Does it work with other fluids ? The DPF/Catalyst Cleaner dissolves and removes all contamination and soot residues from the particulate filter and the catalyst – no disassembling required. The product eliminates any performance decrease or disruption caused by contaminated particulate filter and catalysts. DPF/Catalyst Cleaner restores the complete function of the diesel particulate filter and catalyst. Application To clean use DPF Pressurized Tank Air Gun (part no. 7946) together with DPF Probe with 5 Interchangeable Tips (part no. 7945). When cleaning large diameter units also use DPF Spray Probe Long (part no. 20630). Cleaning is done by removing a temperature or other sensor from the DPF unit.

The gun is simply filled with Launch DPF cleaning fluid and connected to a compressed air line, enabling you to spray at pressure into the DPF. The following questions and answers session was conducted by AutoTechnician and Launch's Richard Collyer Andorra, Austria, Denmark, Finland, Greece, Italy, Portugal, Spain, Sweden, Bulgaria, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, Slovakia, SloveniaWith the DPF cleaning gun, you can spray a cleaning fluid straight onto the DPF via the pressure sensor or vacuum hole. The gun is simply filled with Launch DPF cleaning fluid and connected to a compressed air line, enabling you to spray at pressure into the DPF. With renewed focus on emissions and air quality, Launch Tech has highlighted the importance of diesel particulate filter (DPF) cleaning, with demand increasing for its DPF cleaning gun and fluid.

A DPF is crucial in helping to reduce emissions as it absorbs harmful diesel particulate matter or soot and burns them off during the regeneration cycle. However, it’s important that it has sufficient time to complete the process and therefore it works best when the vehicle in question is ran for a longer period of time. Yes our DPF cleaning gun will work with all proprietary cleaning fluids on the market today. We have a great product that is sometimes hard to find but we have these made specially for us. Although made to our specification we are confident that you will find this DPF cleaning gun a good quality addition to your tooling. For a professional DPF cleaning business you need the best tools. At ECS we have the best tools and the best DPF cleaning fluid for any professional business. Furthermore this gun is also compatible with ECS Diesel EGR & Inlet cleaning fluid too. What else do I need ? With that in mind we’re finding more demand for our DPF gun and cleaning foam, which helps to remove pollutants from DPFs that may cause premature failures and increased emissions.”The accompanying DPF cleaning fluid dissolves soot build-up in the DPF filter, even from DPFs that will no longer respond to a forced regeneration. The process will reduce soot levels, allowing the DPF software to force a regeneration and recover the DPF filter. With the Launch UK DPF cleaning tool, you have a service ready to offer those customers who fall foul of the conditions, and need their car serviced in the shortest possible time. Yes our DPF cleaning gun will work with all proprietary cleaning fluids on the market today. We have a great product that is sometimes hard to find but we have these made specially for us. Although made to our specification we are confident that you will find this DPF cleaning gun a good quality addition to your tooling. For a professional DPF cleaning business you need the best tools. At ECS we have the best tools and the best DPF cleaning fluid for any professional business. Look out for our new product Diesel EGR & Inlet manifold cleaning fluid. Specially formulatedto be use with this cleaning gun. What else do I need ? Once applied, the fluid will start dissolving soot inside the filter without the need to remove the unit, saving time and effort. You can apply the fluid without removal or other unnecessary work. This High Power Cleaner for Diesel Particle Filters is a special Diesel Additive Solution which is used as a regeneration help in Diesel Particle Filter Systems. Reduces ignition temperature of the soot collected in the particle filter which ensures permanent and complete filter cleaning while driving. The most economical way of particle filter cleaning and protection! The product can be used in all diesel engines and mixed with all diesel fuels.

We recommended garages encourage using our DPF solution regularly as a form of preventative maintenance. However, as everyone’s driving pattern is different, carbon build-up will vary. For example, if the car has low mileage from short journeys, it may be worth cleaning the DPF at a lower mileage than usual. But if the driver regularly drives at a faster pace on the motorway, less carbon may have built up and the vehicle may be brought in with a slightly higher mileage. Cleaning is performed with the DPF Pressurized Tank Spray Gun (part no. 7946) and the specially developed DPF Probe with 5 interchangeable tips (part no. 7945). Depending on the type of vehicle, establish access to the diesel particulate filter. On most vehicles, remove the temperature or pressure sensor of the diesel particulate filter for this. Note: The temperature of the particulate filter during cleaning should be less than 40 °C. In some vehicles the diesel particulate filter is located near the exhaust manifold or in some cases the turbocharger rather than on the underbody. For safety reasons, use extreme care when cleaning these vehicles to ensure that no cleaning or flushing fluid enters the combustion chamber via an open exhaust valve. Launch Tech offers a DPF cleaning gun, which allows technicians to spray a cleaning fluid straight onto the DPF via the pressure sensor or vacuum hole. The gun is filled with Launch DPF cleaning fluid and connected to a compressed air line, so the cleaning fluid can be sprayed at the DPF in-situ and at pressure. Once applied, the fluid will start dissolving soot inside the filter. You can apply the fluid without removal or other unnecessary work. Heavily contaminated cases may require a forced DPF regeneration. Here at ECS we offer our ECS DPF & Inlet cleaning gun. This high quality DPF cleaning gun comes with accessories required for proper DPF cleaning on all vehicles. You can use our ECS Ultimate DPF fluid with this product. Our DPF cleaning gun requires the use of an air compressor set to 4 – 5bar maximum pressure. In combination with our ECS Ultimate DPF cleaning fluid you will be able to carry out DPF cleaning with ease. Does it work with other fluids ?

Diesel Particle Filter Cleaner solves and removes all soot deposition and residues without disassembly. DPF Top Gun Cleaner cleans gently and can be used on all aluminum, magnesium, zinc and cadmium parts. The product can be used perfectly for the latest generation of particle filters. Re-mount the particle filter, add DPF Super Clean and do a test drive of at least 20 minutes. If regeneration does not start automatically by the engine electronic, start it with a garage probe. Richard Collyer, national sales manager at Launch Tech, said: “There’s a lot of messaging about the need to abandon internal combustion engine-powered vehicles as a priority, but it’s often overlooked that a lot of quite simple technology to reduce air pollution and vehicle emissions already exists. Under which customer complaints/DPF faults can Launch's on-car DPF cleaner be suitable? Under which faults is the on-car cleaner not appropriate? Tighter legislation surrounding reducing emissions is forcing motorists to be more environmentally aware. They now also face stricter MOT regulations, which were introduced in May 2018 to prevent vehicles producing excessive emissions, and which no doubt correlates to the significant rise in vehicle failures, with diesel vehicles experiencing by far the biggest surge.