for Samsung Galaxy A12 Screen Replacement with Frame for Samsung a12 a125u Screen Replacement s127dl a125a a125w LCD Display digitizer Touch Screen Assembly with Repair Part Tools 6.5 inch

Product Information

Galaxy A12 is also known as a frame, chassis, support, AMOLED, S AMOLED, OLED, S LCD, TFT, LED, IPS, Retina, screen, internal screen, touch panel, touch screen, touch panel, window, touch display, digitizer, lens, outer glass, Corning, Gorilla, capacitive, resistive. If your device malfunctions due to the quality of a replacement part or our workmanship, we’ll fix the problem free of charge.

If you are the owner of a Samsung A12 and have encountered a broken screen, then don’t worry – you’re not alone. Screen replacement is a common issue with smartphones, and it’s usually a pretty easy fix. In this comprehensive guide, we will walk you through the entire process of replacing your Samsung A12 screen. We’ll cover everything from preparing for the repair to completing the actual replacement. So if you’re ready to get started, keep reading!

Remove The Motherboard

Once you have successfully removed the vibrator cable, put it aside so you can focus on the rest of the guide. Although the smartphone industry has shifted towards designing water-proof or water resistant devices, few phones are truly water resistant and even those that are can only withstand immersion in water for only a few minutes.

Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts. First, locate and hold down the button flex cable. These are usually located on the right side. You have to apply some heat to loosen up the flex cable to remove it without any damage. Removing Speaker Cover Before installation, please test the screen, it is not eligible for warranty if the screen is damaged during installation or during usage. The screen is eligible for warranty if there is no physical damage and the warranty seal is intact Start by removing the LCD connecter and the antenna cable with a tweezer so you can make sure nothing is damaged. Once these two cables are unattached from the charging port board, you can safely remove them so you can continue further.Your phone Screen Replacement or repair will take approximately 40 Minutes ~ 1 hour. However some phone models might take longer to allow the adhesive enough time to bond properly. This time though will also vary depending on how many people you will find on queue. Customers are advised to come in early to avoid long waiting time and queues at our service center. Now you have to take out the speaker from the phone’s left side. Removing it is easy. All you have to do is clip it with a tweezer, and it will come out. If your product is deemed to be out of warranty on engineer inspection the repair and a convenience surcharge will be chargeable.