Aico EI3024

Product Information

This alarm is a multi-sensor fire alarm - it contains both optical and heat sensors to provide a total fire coverage. The intelligent software it has installed allows it to detect all fire types (TF1 to TF6 & TF8) surpassing traditional single sensor Alarms. In addition, the chamber design, integrated insect screen and unique dust compensation algorithm reduce the risk of false alarms. Performing a regular test is a vital part of ensuring continued fire and carbon monoxide detection. Alarms should be tested monthly to ensure everything is working correctly.

Aico Ei3024 3000 Series White 230V Mains Multi-Sensor Optical and Heat Alarm with Rechargeable Battery If the alarm contains AudioLINK – Once the alarm has stopped activating and it is safe to enter the property extract a report to identify the details of the incident.Insert a flat headed screwdriver into the removal slot of the alarm. This is marked with an arrow. Make sure you keep the screwdriver horizontal (i.e. parallel to the ceiling). The Ei3024 Multi-Sensor Fire Alarm is SmartLINK compatible, Simply plug in an Ei3000MRF module for wireless interconnection, data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway and Portal. The memory feature allows an Alarm that has previously activated to be easily identified (through the red flashing LED). If you have more than one alarm in the property and they are interconnected, this will also trigger all the other alarms in the property. The Ei3024 is powered by 230V AC mains. In the event of mains failure, the rechargeable 10 year built in tamper-proof lithium cells will provide up to 3 months power supply in the case of a wireless RF installation or up to 6 months in any other case.

Intelligent integrated software enables the device to detect all fire types (TF1 to TF6 & TF8) which surpasses conventional single sensor alarms. The risk of false alarms is also greatly reduced with its smoke chamber design, integrated insect screen and automatic dust compensation. Most of our alarms have a 10-year life, after which they should be replaced to ensure you carry on getting the best protection. Find the alarm with the red light rapidly flashing. Press its ‘Hush’ button to silence. If that does not silence it, clean the alarm using a vacuum. Wait for 10 minutes and the issue should be resolved.Above this is the ‘Replace By’ date, but note that the date on the label shows the maximum life of the alarm and alarms should always be replaced before their life is up. If you’re not sure about quantities, sizes or have any other questions about your electrical wholesale products, our Electrical2Go sales team will be more than happy to help. Give them a call now on 01424 220384. KEY FEATURES The Ei3024 contains AudioLINK technology, which allows you to extract real time data from the alarm directly to a smartphone or tablet via the AudioLINK App. The memory feature allows an alarm that has previously activated to be easily identified (through the red flashing LED). The Ei3024 self tests its sensors, battery and internal circuitry every 48 seconds. Any fault condition found will be indicated by a combination of yellow LED flashes and/or audible beeps. This is the Aico Ei3024 is a multi-sensor fire alarm with enhanced optical smoke sensor and automatic dust compensation; it delivers a faster response to a wider range of fires. This multi-sensor alarm detects both smoke and heat from a fire, and so the location is ideally in the hallway, landing, living room, and bedroom areas.

Never ignore a beeping alarm, as it is a warning sign of either a danger in the home or that an alarm needs maintenance. You will know when you need to change the battery, as you will hear a single regular beep (low battery warning) coming from the alarm, however it is recommended that you change the battery every year.

Not Sure Which Product Is Right For You? Try Our Product Selector.

SmartLINK compatible. Simply plug in an Ei3000MRF module to enable wireless interconnection, data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway and Portal. The four-digit code shows you the year and week that the alarm was made. The first two digits relate to the year and the second two digits relate to the week.