Robus Disabled Persons Toilet Alarm Kit (White)

Product Information

It’s vital to ensure that any disabled call alarm system you install in a disabled toilet complies with BS 8300:2009. Both of the devices that make up this range of equipment are powered by an internal battery. The transmitter unit uses a 9V alkaline type battery, whereas the sounder beacon receiver uses a 3.6V AA lithium battery as a power source. This means that there is no need to provide a mains power supply to this system. This saves time and costs in the installation of the system. The system monitors the batteries to ensure there is enough power in them to maintain an operational system. When the battery levels are getting low the receiver unit will beep to indicate that the batteries require changing. DDA Wireless Disabled Toilet Alarm System

NC943B includes an onboard 500mA rechargeable standby battery that will power the system for up to 24 hours standby and 15 minutes alarm running time. In our Disabled Toilet Alarms category you'll find a range of disabled toilet alarm kits including the Zeta disabled persons toilet alarm with a 4 zone capacity suitable for premises with multiple disabled toilets. We also have an attractive stainless steel disabled toilet alarm which perfectly combines design and function.

Disabled Persons Toilet Alarm Kits

It’s also critical that the pull cord for the alarm is located within easy reach and can be immediately identified as a disabled toilet call system, rather than a fire alarm (this also means that the sound has to be different to that of a fire alarm).

The red reassurance LED and sounder on the NC809DBBT Reset Point c/w Sounder activate intermittently (approx 1 second on, 5 seconds off) to let the user know help is on the way. Tried, trusted and respected by users and installers alike, the NC951 disabled persons toilet alarm can help building managers and service providers comply with the requirements of BS8300, the Disability Discrimination Act, the Care Standards Act and the English Tourism Council's National Accessibility Scheme. The NC951 disabled persons toilet alarm is also ideal for use as a single zone emergency assistance alarm in changing rooms, solariums, interview rooms and reception areas.The position of these disabled toilet alarm components is very important to allow the alarm to be used effectively. For example, the bangles on the alarm pull cord should be spaced very specifically at 100mm from the floor and 800-1000mm from the floor – this allows either bangle to be reached in an emergency whether the occupant is sitting on the convenience or lying on the floor. Once an alarm has been activated by pulling the cord two things happen; the external indicator alerts staff to the situation and the reset button situated within the room beeps continuously until it is reset. The beeping from the reset unit both indicates that the alarm has been successfully triggered and reassures the disabled person that assistance will be with them very soon. NC807C & NC809DBBT have red Reassurance LEDs; NC806CS has twin red Alarm LEDs. NC943B has a red Alarm and green Supply Present LED;

In a typical disabled toilet alarm kit you'd expect to find a red ceiling pull cord with two bangles, a reset button with an integrated sounder and an external indicator with a sounder or combination sounder/flasher.Disabled toilet alarms should be installed in any disabled WC in line with BS 8300 and the Equality Act 2010. Providing a reliable and effective means of raising an alarm is essential to allow disabled people on your premises to carry out their daily lives with confidence. All of our disable WC alarms are manufactured in accordance with the latest directives and are compliant with building regulations. It is a requirement to provide compliance to the DDA (Disability Discrimination Act). This product helps comply with this act by providing an emergency call signalling system from a disabled toilet.

The red reassurance LED on the NC807C Ceiling/Wall Pull Unit and the red reassurance LED and sounder on the NC809DBBT Reset Point c/w Sounder activate steady to reassure the user the call has been registered. The Wireless Disabled Toilet Alarm equipment is ideal for a fast installation. This equipment can be installed without having to install any cables between the pull chord unit and sounder / beacon indicator device. Battery Powered Wireless Disabled Toilet Alarms The member of staff responding to the Alarm call presses the ‘Call Accept’ button on the Call Controller. For the more prestigious settings, we offer brass and stainless-steel disabled toilet alarm systems, which include stainless steel push buttons with LED indications. All our systems provide audible and visible recognition of the sounding of the alarm to give the caller re-assurance that help is at hand and on the way. Hoyles Disabled Toilet Alarm Kits are supplied complete with Aidalarm controller, ceiling pull cord, reset button, overdoor light and sounder and instruction label with braille text. Additional accessories are available for the disabled toilet alarms range including anti ligature pull cords, anti-vandal protective cage and Dado panic strip.We are pleased to introduce our range of Honeywell emergency call alarms. These are ideal for small installations and are extremely easy to install. C-Tec Disabled Toilet Alarm Kits NC943B has a link-selectable Call Accept/Reset button; NC807C has a pull cord with two bangles to generate a call; NC809DBBT has a Reset button. W x 87 H x 93 D (NC943B); 87 W x 87 H x 68 D (NC806CS); 87 W x 87 H x 24 D (NC809DBBT). Ceiling/wall pull measures 93mm diameter x 27 D.