TP-LINK TL-PA8010P 1200 Mbps Gigabit Passthrough Powerline Adapter UK Plug – Single Pack (Renewed)

Product Information

Without replacing your existing devices or buying a whole new WiFi ecosystem, OneMesh™ helps you create a more flexible network that covers your entire home with TP-Link OneMesh™ products. From these results you can see the two top speeds are a superb peak throughput of 407.79Mbps and the highest average of 283.67Mbps, both from our location 1 test. Even testing in location 4 which is our garage that is not even on the same wiring circuit, we still received an excellent top speed of 174.77Mbps. We are still amazed at the speeds we get in our old garage, assured in the knowledge that, if needs be, it can be turned into a man cave with high speed network access readily available! Plug and Play - Set up your powerline network and start enjoying fast, seamless wired/wireless connections in minutes When using this guide, please notice that features of the powerline adapter may vary slightly depending on the model and software version you have. The powerline adapter availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual powerline adapter experience. Press the Pair button on any of the existing powerline devices for 1 second. Its Power LED starts blinking.

from the main adapter in the garage, not the same ring main, a single spur from the main consumer unit. Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty. Open Source Code For Programmers (GPL) Connect your wired device, such as a computer or game console, to the powerline adapter via an Ethernet cable.IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device. How to set up a new secure wireless network using Powerline ac Wi-Fi Kit by Pair button 06-28-2022 87310 The tpPLC utility enables you to view and manage your TP-Link powerline network. Its bold and intuitive interface helps you easily configure each powerline device.

Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28) A firmware update can resolve issues that the previous firmware version may have and improve its current performance. To Upgrade Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product. Press the Pair button on any of the powerline devices for 1 second. Its Power LED should start blinking. Note: If the Powerline LED does not turn on, reset each powerline adapter to its factory default settings. Refer to FAQ-Q2 for detailed information.

To Use Third Party Firmware In TP-Link Products

Tips: We recommend that you plug in your powerline devices next to each other, or as close to each other as possible when pairing. Your settings will not be affected. The devices can be relocated to where they are needed once pairing is complete.

Powerline adapters work in pairs. You should have at least two powerline products to build a powerline network. To optimize your network performance, please follow these principles: TL-PA4016P KIT V2.0 , TL-WPA4220 , TL-WPA7519 KIT , TL-PA9020 , TL-PA4025P , TL-PA7010P , TL-WPA7510 KIT , TL-PA7010KIT , TL-PA7020P KIT(FR) , TL-PA4015PT KIT , TL-PA4010P TKIT , TL-PA4010P KIT , TL-WPA7617 , TL-PA9020P KIT , TL-PA7027P KIT , TL-PA8030PKIT , TL-WPA4220 KIT , TL-WPA4235P , TL-WPA8635P KIT , TL-PA7010 KIT(US) , TL-PA7025P KIT , TL-PA8010P KIT , TL-PA7027P KIT(FR) , TL-PA7010P KIT(FR) , TL-WPA4235P KIT , TL-PA7017P , TL-WPA8630KIT , TL-PA4020PT KIT , TL-WPA9610 , TL-PA4010P KIT V2 , TL-PA8030 , TL-PA9025P , TL-PA6010 , TL-PA7020P , TL-PA551KIT , TL-WPA8631P , TL-PA4025P TKIT , TL-PA4016P KIT V1.20 , TL-PA8033P , TL-WPA761 , TL-PA717 KIT , TL-PA4010 KIT V1.20 , TL-WPA8630 , TL-WPA4230P KIT , TL-PA4010 KIT , TL-PA4010PT Kit , TL-WPA8630P , TL-PA8010PKIT , TL-WPA4220 V1.20 , TL-PA7015P , TL-PA8033P KIT , TL-PA8030P KIT , TL-PA8010P , TL-WPA7517 KIT , TL-PA6010KIT , TL-WPA4220 TKIT V2.0 , TL-WPA8730 KIT , TL-PA8010 , TL-PA4020 KIT , TL-WPA4220KIT , TL-PA7020 KIT , TL-PA9020 KIT , TL-WPA8630P KIT , TL-PA8015P KIT , TL-WPA4226 KIT , TL-PA4020P KIT V2.0 , TL-PA511KIT , TL-WPA4230PKIT , TL-PA7020P KIT , TL-WPA4220 TKIT V1.20 , TL-PA8010 KIT , TL-PA8035P , TL-WPA7617 KIT , TL-WPA4226T KIT , TL-PA6030KIT , TL-PA4010P , TL-WPA8730 , TL-PA9020P , TL-PA7019P KIT , TL-PA7019 KIT , TL-WPA7619 KIT , TL-PA4010 TKIT , TL-PA4010P KIT V2.20 , TL-PA7010 KIT , TL-WPA4220 KIT V2.0 , TL-WPA9610 KIT , TL-PA7017P KIT , TL-PA4015PKIT , TL-PA7025P , TL-WPA4230P , TL-PA7017 KIT , TL-PA8030 KIT , TL-WPA4530 , TL-WPA4221 KIT , TL-PA9025P KIT , TL-PA4020P KIT , TL-PA4015P , TL-PA4010 KIT V2 , TL-PA411KIT V3 , TL-PA7020 , TL-WPA4226 KIT V1.20 , TL-WPA4220NET , TL-PA7017 , TL-PA4020 , TL-WPA7517 , TL-WPA8630 KIT , TL-WPA8630 KIT(FR) , TL-PA8035P KIT , TL-PA7017P KIT(Fr) , TL-PA4025P KIT , TL-WPA4227KIT , TL-PA551 , TL-PA4022P KIT , TL-PA7010P KIT , TL-PA7010 , TL-WPA1300P KIT , TL-WPA8635P , TL-WPA4220 KIT V1.20 , TL-PA4016P KIT , TL-WPA4530 KIT , TL-WPA8631P KIT , TL-WPA4220 TKIT , TL-PA4020P KIT V1.20 , TL-WPA4225 KIT , TL-PA711 KIT , TL-PA8030P , TL-PA4020P All powerline adapters share some common factory settings, and can communicate with one another. If you want your powerline adapters to communicate only with your own powerline adapters, you should pair them. Thus a secured powerline network is formed and other powerline adapters can no longer join your powerline network without being paired.

To Upgrade

The terms “AV1200” and “1200Mbps” are derived from applicable specifications and refer to the theoretical maximum physical-layer data transfer rate. Those terms are used on this product solely to indicate its compatibility with other “AV1200” or “1200Mbps” powerline devices. Actual data speeds vary and may be limited by the product’s Ethernet port and other network conditions such as data traffic, electrical noise, and wiring issues.For better performance, powerline devices should be deployed on the same electrical circuit and rated for the same HomePlug standard. A minimum of two powerline devices are required to establish a powerline connection. If you are uncertain about your network conditions, you should consult an IT professional to assist in selecting a networking product. It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade. How to add an extra Powerline adapter to the existing Powerline network by adding the the powerline key on the Utility(Green UI) 06-28-2022 103637