Lay-Z-Spa 13222_05 Hot Tub Floor Protector, 10 Piece Protective Pad Set for Spa and Pump (Fits All Models Except Maldives), Grey

Product Information

Read more: How to Insulate Your Inflatable Hot Tub What Should You Do If Your Inflatable Lay-Z Spa Gets a Puncture? If you’ve ever owned an inflatable hot tub, you’ll know that this is quite a conservative estimate, so let’s look into how much it will cost you to run a Lay Z Spa! Lazy Spa Running Costs 2023 To put it simply, the water in your Lay Z Spa wants to be the same temperature as it is outside, so the colder it is, the faster the water temperature will drop when the heater is off.

Lay Z Spa has made this process even more energy efficient through their frost protection system, which maintains the water at 6 degrees Celsius, provided there is power to the pump! Cheapest Way To Run A Lazy Spa This helps to preserve energy by only drawing power when necessary, producing a cost-effective heating system that has been proven to intelligently warm up hot tub water 10% faster than spas from comparable brands. Duraplus construction If you know your energy tariff, you can use the voltage of your Lay Z Spa in kWh (2.05 kWh for all models) and your average usage in hours to estimate your running costs.

Hot tubs, chemicals & spares

People often ask do you leave inflatable hot tubs on all the timeand if is it more cost-effective than switching them off if you’re using it regularly, as it costs more to heat a hot tub than it does to maintain a set temperature. One of the top energy efficiency features in Lay Z Spa hot tub options is their power-saving timer. The square Lay-Z-Spa® Floor Protector is an essential part of hot tub insulation for better energy efficiency and protects the base of your inflatable hot tub. The energy-saving hot tub accessory helps to reduce the amount of heat that is lost through the bottom of your Lay-Z-Spa® and contributes towards better hot tub running costs. The better maintained your tub is the less you will have to drain and refill it saving money on water costs too! How long do you spend in the spa? Next, clean and dry the area around the puncture, preferably using acetone. Cut a circular rubber that is enough to cover the punctured area and apply solvent-based glue to it.

Lay Z Spa’s rapid heater is thermostatically regulated (like a home central heating system). Once it hits a set temperature, it will automatically turn off until the water drops a few degrees. Lay-Z-Spa hot tubs all come with a cover and an insulating inflatable lid as standard to help with heat retention and to stop debris from falling in. Freeze Shield technology constantly monitors your inflatable hot tub water and automatically engages the central heating system if it drops below 6 degrees Celsius. FOAM MAT High density EVA foam tiles provide 𝐄𝐗𝐂𝐄𝐋𝐋𝐄𝐍𝐓 𝐒𝐔𝐏𝐏𝐎𝐑𝐓 and cushioning, Strong enough for a great workout and soft enough for kids play mat A gym mat that's as tough as you are When your inflatable Lay-Z spa gets a puncture, it will start deflating, and that will be your cue to act. The first thing you should do is to empty the spa of water so that you can locate the puncture. Once you find the punctured spot, mark it using a marker pen or chalk so that you don’t lose it.If you use your Lay-Z-Spa often, say 3 or more times a week on different days, it is considerably more cost-effective to keep the heater set to one temperature. Dropping the temperature or letting the water cool and turning it up again will actually consume more energy than keeping it at a steady temperature. And, most importantly, you can get it any time you like without having to wait. A simple but very effective way to save money when filling up your hot tub is to use water from the hot tap. Just make sure you start with an inch or two of cold at the bottom first and ensure the water from the hot tap is no hotter than 40°C. It is far more energy-efficient to start your hot tub up with warm water rather than filling the hot tub with cold water and waiting for the pump's heater to do all the work. To install the tile, you should start by creating a level and strong sub-base such as a layer of gravel. This layer should be able to support the tiles without sinking. When the sub-base is all ready, lay a sheet, also known as a membrane, to prepare for the installation of the tiles.