20 Pieces Micro JST PH 2.0 2-Pin Connector Plug Male and 20 Pieces 10 cm Red and Black Silicone Cable Wire with Female Connector

Product Information

Your male connector has a bar down the center, which corresponds to the long slot in the middle on the female connector. Very similar to the above series, however in a dual row configuration. Commonly used in LCD / LVDS applications. GH (1.25mm pitch)

JST-SH | Molex Picoblade (1.25mm) | JST-ZH | Molex 2mm | JST-RCY | 1.27mm | AR6400/PKZ3352 | DC | Power To minimize confusion, it is best to describe a connector using: the manufacturer's name, exact connector series, and optionally the pitch, such as "JST-XH" or "JST-XH-2.50mm" or "2.50mm JST XH-series" or other variations. VH is a larger type of JST connector featuring positive latching and is generally used in high voltage and/or high current connections. Power supply connections in Japanese brand appliances is the most likely place to find them. JST connectors are electrical connectors manufactured to the design standards originally developed by J.S.T. Mfg. Co. (Japan Solderless Terminal). [1] JST manufactures numerous series (families) and pitches (pin-to-pin distance) of connectors. [2] [3] A majority of JST through-hole headers can't withstand the temperatures required for reflow soldering, because the plastic has a lower melting point since they were designed for wave soldering methods. Some JST surface-mount headers are designed to handle higher temperatures of reflow soldering. [25] Connector confusion on the internet [ edit ]The female PH has a wide cut out and two holes at the bottom (2 mm pin spacing), whereas the XH has two slots from the top towards the bottom (2.5 mm pin spacing). This 2.0mm pitch connector is very commonly seen in low cost consumer electronics as well as a plenitude of pre-fabricated hobbyist PCBs and parts. They’re dirt cheap, reasonably compact but not particularly robust.

We recommend you own a set of crimping pliers as well, such as these nice ones from Engineer - they're easier to use than trying to crimp with pliers. There's a good reference at mattmillan.com which helps to identify different types of JST connectors. These are very similar to PH/XH however less common. Generally found in consumer products (for example: Japanese brand LCD televisions) which need to perform well in HALT testing. IWISS IWS-2820M. A copy of the Engineer PAD-11. Not as well made but for the significantly lower price, it could be forgiven. Like the above series, also surface mount only however featuring positive latching mechanism and a completely different type of mating surface. VH (3.96mm pitch)The JST-PH connector is used on many high current micro ESC and LiPo batteries - e.g. the E-flite Blade mCPX helicopter, the Spektrum AR6400LBL receiver and several Parkzone, E-Flite 'UMX' models. JST manufactures a large number of series (families) of connectors. [2] The PCB (wire-to-board) connectors are available in top (vertical) or side (horizontal) entry, and through-hole or surface-mount.

The solder side of the header has a retention mechanism that prevents it from floating during soldering. As a result, the header can be positioned accurately. Among our electric components, we can put forward a wide variety of innovative catalog products and crimping tools: FFC/FPC connectors (insertion strength zero, no ZIF), to crimp/crossing, SMT/CMS The WC-240 is nice to use, but there’s not a lot to set it apart from generic tools for occasional use. I personally crimp a large amount of PH, hence the investment in the official tool. For more obscure types, no hand tool is offered, however JST do sell a hand frame (YRS-XXX) for mounting dies for their MKS-L applicator (used in the AP-K2N crimping machine), a very expensive solution, and the only option for production/mission critical applications. Unofficial / Generic Note: Some 2.50 mm parts are incorrectly sold on the internet as 2.54mm (0.100in), and the 1.25mm parts as 1.27mm (0.050in).

Spécifications

ZH is one of the smallest pitch types of through-hole JST connector. Types smaller than this are all SMD. I am told these are common 3D printer related applications. Example part numbers It is designed to meet the demand for high-density connection of internal wires to printed circuit boards. It is compact, highly reliable and low in cost.

JST Corporate Profile and History". JST. Archived from the original on 27 November 2016 . Retrieved 13 June 2017. A teeny weeny surface mount only connector family from JST. Commonly found inside laptops for connecting various items to the motherboard. Housings are available with “wings” to aid disconnection. Housings are “SH” and headers are “SR”. Example part numbers Choosing the Right JST Connector". DronesEtc. Archived from the original on 4 March 2016 . Retrieved 13 August 2015. A female JST PH has one slot (or rather a cut-out) going down in the middle of the female. Which corresponds to the bar going down the middle of the male (as can be seen on your photo). Either side of the slot/cut-out are two small holes at the bottom.JST France, electronic components manufacturer, was established in Vitry-le-François in 1989. Our plant is composed of 3 machine shops (molding, assembly and stamping) and an industrialization