Mackie CR3-XBT Active 3" Reference Monitors with Bluetooth Streaming - 50 W Bluetooth Computer Speakers perfect for Home Studios and Content Creators

Product Information

I got a new set. I still couldn't pair them. Not believing the two sets would be bad, by chance, I decided to hold the button down. After several seconds, the same green circular light blinked, but this time the speakers showed up on my iPhone.

Although I wouldn’t class these as reference studio monitors with a flat response, there was enough low end energy to get a good idea of what was going on. There may be better studio monitors out there, but these also cost a lot more, and may be better suited to audio engineers. Ultimately you need to find studio monitors whose speakers deliver a flat sound within your budget. Traditionally, poly cones are made through a process of thermoforming, where the cone is heated until soft, before being formed by vacuum pressure.But the PreSonus Eris E3.5 also has treble and bass controls, so you can tailor the high and low frequencies to the acoustics of the room. Since 1982, PCMag has tested and rated thousands of products to help you make better buying decisions. See how we test.

The CR3s xbt is pair of good multimedia speakers that sound very clean. They are NOT really meant for pro level work, however beginners can consider them as it is well suited for someone on a tight budget.

EM-USB Arctic White

This is all complimented by custom-tuned rear ports, leading to balanced, smooth bass extension, alongside a meticulously designed waveguide. This results in unrivalled sound dispersion and clarity at every kind of listening level. Handy Controls & Connectivity Overall the sound could have been a 'bit more tigher' plus needs better clarity and separation on higher volumes IMO. Specially designed waveguide delivers unmatched clarity and sound dispersion at all listening levels You might have come across the PreSonus Eris E3.5 while researching the studio monitor market. These studio monitors also have excellent sound quality and a similar range of features, including the volume knob and headphone output.

By way of specifications, the CR3‑X covers the 80Hz to 20kHz (‑3dB) range, which is very respectable for such a compact speaker. Per pair, they have a peak level of 97dB SPL, which is loud enough for comfortable close‑up monitoring. The amplifier section is Class‑A/B, and can deliver 50 Watts of peak power. There's a nice sense of weight to the sound and the highs come over as detailed... These are studio monitors with small subwoofers, so I wasn’t surprised to hear a bass roll off from around 80 Hz. This frequency is an octave above the lowest note of a bass guitar, or E2 on a piano. Anything below that simply isn’t there. Bluetooth được tích hợp cho phép phát nhạc không dây từ điện thoại thông minh, máy tính bảng hoặc máy tính hỗ trợ Bluetooth.EDIT: I really appreciate all the help from yall. Probably shoulda mentioned i'm not really an engineer, im a rapper, i just started to mix my own vocals a little bit here and there. Im not that into it honestly but it makes things easier sometimes. They’re also a good choice if you need high quality, easily portable speakers for location recording – they’re the perfect size for putting in a bag. They’ll also suit anyone composing music, programming midi parts or undertaking other pre-production work. I was surprised by how full and punchy the sound was. There’s also a lot of clarity in the highs and mids. As long as I was in the sweet spot, the stereo imaging was much more accurate than I expected for the price. I have a recording studio for my voice over work and these are perfectly fine. I've heard criticisms that the bass is a bit weak. Is that because we have been taught in the last decade that unless you're almost damaging your ears with bass that your speakers have weak bass? I found the bass to be acceptable and in general, even with music, these sound pretty good to my ears. But, they are not Genelec monitors and don't claim to be.