Pulsar Gaming Gears - Xlite V2 Mini Wireless Ultralight (55 g) High Performance Super Light and Fast Ergonomic Gaming Mouse 2.4Ghz 1ms 20000 DPI Optical Sensor PAW3370 - Black

Product Information

Xlite V2 Wireless is equipped with the sensor “PixArt PAW 3370” that is often used in current high-performance wireless mice. The main specifications are a maximum of 20,000 DPI, maximum acceleration of 50G, and a maximum speed of 400 IPS. Depending on the sensor placement, the range of motion of the cursor when moving the mouse to draw an arc around the wrist differs. The closer the sensor is to the front side, the finer the wrist’s movement is captured, and the more comprehensive the range of motion of the cursor in the horizontal direction. Connection For wireless USB headsets, ensure that the device is not subject to wireless interference. Turn off or disable any other wireless devices or move away from them, to avoid interference.

We've converted this review to Test Bench 1.5. This update adds a new Main Button test group, which provides button actuation data and switch information. We've also made minor changes to how we calculate the Office usage score. For more details, you can see our full changelog here. For those who are still new to the concept, X-Lite is the stepping stone to a fully immersive softphone VoIP experience. With some of the most popular features and functions of the full Bria desktop client, it offers a taste of what you’ll get if you make the upgrade. How do you call with X-lite? However, the feeling of separation is unsatisfactory, and I feel that it is not suitable for environments where detailed operations in units of 1 notch are frequently required. Wirelessly connected gaming mice tend to be heavier than wired mice because they have a built-in rechargeable battery (or dry cell). The Xlite V2 Wireless has a built-in battery that can operate continuously for up to 70 hours.

A Smaller Footprint Windows!

Restart the computer to completely uninstall the drivers. The drivers are automatically installed on the computer after a restart.

If the headset works without Synapse, do a clean reinstall of Synapse.See the answer below for more details.When the headset is used with a PC, ensure that the "Hands-Free AG Audio" is set as the default communication device. xCounts were accurate, and there were no problems with the actual sensor behavior. In addition, we also carry out play tests on Apex Legends and VALORANT . Communication is stable when connected wirelessly, and there are no problems with long-term operation. Software Desktop softphone application for Windows with Voice Over IP protocol as an alternative to traditional landline telephone. It is hard to leave marks on the touched part, and dirt from sweat and sebum is relatively inconspicuous.

For example, verify the sensor performance with Mouse Tester xCount . The DPI was 400, 800, 1600, and 3200; the polling rate was 1000Hz. Due to the nature of the tool, the results may vary depending on the environment. Note: If the earpiece works once the software is disabled, reinstall the software and restart the computer. If your goal is to run a dedicated task in as little storage as possible - then look no further than XPlite.We've renamed this review as the Pulsar X2 to better match the advertised product name. The review has been updated to reflect this change. Adjust the "Microphone" and "Microphone Boost" to lower values. Higher levels can cause the mic to be more sensitive. Calls can be setup by utilizing different DTMF methods, that is signaling digits between user agent servers and user agent clients.