Paslode 300270 Finishing Nails, Silver, F16x32mm

Product Information

Square - Square masonry nails are very similar in most qualities to the round nail, only differentiating in shape. They will both be made from hardened steel with a rustproof zinc coating. I’d now like to take you into the fascinating world of ……wait for it………Brads! (and Pins!!) Yes, you can’t believe it can you? You’ve waited all this time and, finally, it’s what you’ve been searching for your whole life, your Holy Grail is here right at your fingertips……….No? Seriously though, there is a lot of confusion around size and gauge of brads and pins and even the regular user of nailing tools still have confusion around nail gauges. So why don’t we take the lid off and give a little clarity to the murky world of brad nails?! Finishes: Smooth Shank - The most basic, but also the most common due to its low price point, is the smooth shank nail. A smooth shank is named that way because, as the namesake, it has a completely smooth shank. Oxidation, or rust, is the enemy of any nail which will be exposed to elements like rain or humidity. Galvanization itself is actually a simple act, in which the steel nails are either electroplated or dipped into a molten zinc mixture to give the required coating. Well, following my previous post on staples, which also explains about finishes in both Stainless Steel and Galvanized. Fasteners:

Finish nails have similar characteristics to brad nails; however, they’re longer and sturdier. Let’s talk about their pros and cons. Installation of a fluted nail will be exactly like a normal nail installation. Fluted nails will excel at tasks that require higher levels of grip. The goal, especially with brad and finish nails, is to have a clean final project. However, your project won’t be clean if there are a bunch of dents and dings around your nails.

Cut Nail

Aluminium nails - Aluminium nails are more prone to corrosion than stainless steel or copper nails, while not having any additional strength over copper either.

Gauge Finish Nails are available from us in straightor angled ( 20 Degree) formation with the latter suitable for Dewalt and Paslode Finish nailers. The range of leg length sizes varies from 20mm to 64mm with the angled available from 32mm to 64mm. Finishes in either galvanised or stainless steel. The following video compares 16 Gauge to 18 Gauge. Too much pressure is being released on the nail, causing it to blow through most of the top board. Instead of holding onto the whole board, the nail might only be grasping a quarter of the fibers. Brad nails are also fairly easy to remove if you needed to pull them out. Though they can secure your material, they are not so permanent that you couldn’t get them out.

Finishing Nails

Nail adjustment: this feature allows you to change the size of the nail the gun accepts, allowing you to complete a wider range of tasks. When driving in a panel pin, it is common practice to use a punch to drive the head below the surface of the wood. This allows more gripping strength and the ability to neatly seal over the nail. Finishing nails are best suited for jobs like skirting, panelling, and cabinet work. Able to be sunken below the surface, finishing nails are great for non-visible work but will retain extra gripping force over other smaller pin nails. A nail set will be required to make full use of finishing nails as when driving below the surface, there stands a good chance of surface damage. Finishing nails are the most common nails used for small-scale and DIY wood projects. While this provides less gripping force than other shank types, in places where grip force is not as needed, a smooth shank is perfect for the job. Smooth shank can also be ideal in applications where the nails are only temporary and intended to be removed again. Wire Weld - Wire weld collation would have one or two thin strips of wire attached to your nails in the strip. Wire weld lends itself to avoiding all the problems faced with paper and plastic collation.