Drayton 123042 Digistat +3RF & Receiver, White

Product Information

Depending on the fuel type you select during installation will affect how Digistat works with your boiler/heat source - so ensure to select the correct type during installation. Digistat supports the following fuel types: Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you. Do I need an OpenTherm boiler to use Digistat? Typically 30M, however building construction and materials may effect this. Signal strength test should be carried out.

We manufacture two different types of sensor kits. One is described as a remote sensor and the other as a setting kit.When used with electric heating the Digistat cycles the heater at 12 cycles per hour to maintain room temperature and save money. My Digistat +2/3 appears to switch off before my set point is reached and sometimes remains on after my set point is reached, is this normal? To swap between Heating and Hot Water on the thermostat press the setting button (cog symbol) to open this open. The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality:

However this auto-pairing process only lasts 2 minutes (to avoid issues of pairing with the wrong Digistat). If you find that the 2-minute auto-pairing period has expired, please follow the following process: The Digistat+3RF also offers a range of programmable features, allowing users to set different temperature schedules for different times of the day or week. This can help to maximize comfort and energy savings by ensuring that the heating system is only operating when needed. The TRV is liquid filled this gives a fast response to temperature and provides a greater temperature accuracy. Preset 3 provides heating all day long How is Digistat suitable for visually-impaired tenants/homeowners? When used with an oil boiler the Digistat will allow the boiler to run without cycling for improved efficiency.

Digistat+3 RF

I have a Digistat+RF room unit with my combi boiler. Is it possible that interference from other wireless appliances can occur, ie computer systems, walkie talkies, radio controlled toys? day / 2-day programming:This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend. The thermostat is not communicating with the receiver. Replace the batteries in the thermostat. Re-commission the 2 units. The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality: 7-day programming

When used with a Heat Pump the Digistat will protect the compressor by reducing cycling to 3 cycles per hour, to improve the life of the compressor. To shut the valve off permanently use the plastic decorator cap that comes supplied with the valve, the valve will remain shut no matter what the temperature.I have a Drayton TRV4 thermostatic valve on the radiator. Is it correct that it can be installed on both the Flow or Return and can be mounted either horizontal or vertical?