3.5mm Stereo Female to 2-Male Y-Splitter Audio Cable 2M, Ancable 1/8" Female to 2 Dual 1/8" Male Aux Mic Splitter Jack Cable for Speaker, Headphones, PC, Laptop, Aluminum Connector

Product Information

In terms of Y splitter cables offering better bass quality, this may or may not work for your subwoofer. Some subwoofers have an auto-on feature which can sometimes cause the bass to cut out when the sub is operating at lower levels. A Y-adapter cable works simply by dividing one audio signal into two similar or identical audio signals, thereby enabling the input of the audio signals into two different output devices. How To Connect Your Receiver and Subwoofer Using A Y Splitter However, when choosing whether to use a subwoofer Y splitter cable or not will depend on the design of the sub and the amp in the subwoofer. Since both inputs are driven, you will get more input signal when the amp sums the two inputs together.

As we have mentioned before, a Y cable is used to connect your AV receiver to your mono subwoofer and thereby transmit the low frequencies the subwoofer needs to operate. A Y splitter is definitely not a must for most subs. Any cable designed for subwoofer use should be just fine. send and return (outbound signal on one leg of the "Y"; inbound signal on the other; signals kept separate). [9] [10] If you are using an AV receiver with bass management, it may only have one (mono) sub out connector.

The Overclockers Difference

By using a subwoofer Y cable for both the left and right subwoofer input, you can increase the bass output of your subwoofer by about 3dB. When connecting your active subwoofer to your AV receiver, it is common to use subwoofer cables or basic RCA cables.

First of all, you can hook up a powered subwoofer properly with regular RCA cables. A “Y” splitter cable is not necessarily needed. The fact is that any single, standard RCA or subwoofer cable should do just fine for your subwoofer.Robjohns, Hugh (January 2013). "Lewitt Audio DTP640 REX". Sound on Sound. A 1.5m Y-cable is supplied with the mic ... to convert the five-pin connection into two standard three-pin XLR connectors, each with labelled cable sleeves to identify which provides the dynamic element signal, and which the capacitor element. A Y adapter cable or splitter cable is a cable that can be used to connect your subwoofer to your receiver. It is rather easy to find a RCA cable at your local home department store or just lying around your house. However, there are a few benefits to using a Y cable including increased dB levels, better frequency separation, better bass response on some subs, etc. In general, using a subwoofer cable helps to ensure optimal performance. What Is a Y Adapter Cable?

A Y-cable, Y cable, or splitter cable is a cable with three ends: one common end and two other ends. The Y-cable can resemble the Latin letter " Y". Moreover, sometimes the power coming from the receiver or preamp isn’t set high enough for the sub’s amp to sense that it needs to turn on. Auto-on is used to prevent this problem as well. Subwoofer hum is a common problem in home theater systems. It is so common that sometimes your subwoofer may hum without any input.The fact is, in most cases, it will make very little if any, discernible difference unless you are using a stereo signal. However, the fact is that many (again not all) subwoofers will have increased clarity and bass response when both inputs are fed with a mono signal. 3. Prevent Bass Chipping Out At Low Levels The bottom line is, subwoofer Y splitter cables are not absolutely necessary. You can use them to gain the benefits mentioned above, but they are not required. There are many ways to connect a subwoofer to a receiver. This includes using RCA cables, subwoofer cables, and even wireless. We use Y adapter cables to connect a stereo amplifier or receiver to a mono input subwoofer. We also use them to connect stereo subwoofers to receivers or amplifiers.