Joined in 2023 
82 
63 About this deal
Support IC Chip Type: the pixel controller support almost all the one-wire or two-wire LED driver ICs. Such as WS2811/ WS2812B/ WS2813/ SK6812RGB/ SK6812RGBW/ SK6812/ SK9822/ APA102/ LPD8806/ UCS1903 3pin male LED String Light/Panel/Strip etc. (Not support RGB or GRBW led strips without IC) You can use one controller to control DC5V WS2812B and DC5V WS2813 LED strip at the same time, control DC12V WS2811 ,DC12V WS2815, DC12V 1903, DC12V 6803 at the same time via this singal amplifier since they have the same singal. public static final String[] e = new String[]{"FREQ_USER_COLOR_0", "FREQ_USER_COLOR_1", "FREQ_USER_COLOR_2", "FREQ_USER_COLOR_3", "FREQ_USER_COLOR_4", "FREQ_USER_COLOR_5", "FREQ_USER_COLOR_6"};
After the configuration is finished, the LED indicator will turn into solid green, drag to refresh the device list, and the controller will be shown on the device list. The device use a separate controller (STM32F0) to control CLK and Data lines of the led strips. To hold this controller in reset state, please connect Pin 7 (Reset) to GND. After that, the ESP8285 can be flashed by pull down GPIO0 to GND.
About PyPI
I've been able to get a more complete list of commands by reverse engineering the "LED Hue" app that's provided for the SP110E.
The SP801E LED Controller with 4 output ports, each port supports 1024PCS ICs, so the totally supported number of ICs up to 4096PCS, not only supports the main types of ICs on the market but also supports multiple Art-Net software, supports regular rectangle layout setting and importing DXF files. built-in multiple types of effect layers, text layer, music effect layer, etc. the effect layers support a variety of custom parameters: direction, width, color, length, shape, etc. with the real-time preview function, you will know how it looks like before run on the LED Lights. so it can work with LED Strips, LED Matrix, LED Panels, etc.Here you can learn anything about led strip lights, find the part you are intrested in to learn more knowledge. There are knowledge parts of led strip lights, power supply, controller, accessories, and how to connect led strip lights, etc.You can also watch our thousands of demo video. Compatible With The Types Of ICs: WS2811, WS2812B, WS2813, WS2801, SK6812, SK6812-RGBW, SM16703, TM1804, UCS1903, LPD6803, LPD8806, APA102, TM1814, TM1913,P9813, INK1003, DMX512, APA105 Flashing the firmware can be done with esptool.py --port COM6 write_flash 0x000000 firmware.bin. Differences between controllers Controller
No ‘version’ key in the manifest file for custom integration ‘sp108e_ws2815’. As of Home Assistant 2021.6, this integration will no longer be loaded. Please report this to the maintainer of ‘sp108e_ws2815’ Support IC SM16703 UCS1903 WS2811 WS2812 WS2801 WS2813 WS2818 SK6812 SK6812RGBW TM1804 TM1914 TM1814 TM1913 LPD6803 LPD8806 SK9822 GS8206 GS8208 TX1812 TX1813 INK1003 APA102 APA105 P9813 P943S P9411 P9413 P9414 P9412This SPI signal amplifier is compatible with all kinds of 5V-TTL signal dual signals. It receives one signal and simultaneously output 4 or 8 channels of signals. Each channel can control the same quantity of LED pixels as main controller.
Technical document 1. Command All command send to SP110E has 4 bytes, 3 bytes is data and last byte is command. Controller: High-level SP110E asynchronous controller. Use it only in asynchronous environment (with asyncio) File “/usr/src/homeassistant/homeassistant/helpers/entity_platform.py”, line 558, in _async_add_entity A. AP(Access Point) mode: Controller and Phone connect directly, the controller works as an access point.WIFI Group control: Sync multiple SP108E's together even if the led strips are in Different areas. It only works with a 2.4G WIFI network. DON’T use 5G WIFI network. IOS 10/Android 4.4 or later version.
Great Deal 
New Comment