Shelly Motion 2 WiFi Motion Sensor with Built-in Batter

Product Information

This function requires a working connection to the Internet, so the device can synchronize the time. It allows you to create, view, edit, and delete schedules. For generation 2 hardware it’s possible to select if a device’s input is connected to a button or a switch. Binary sensors are created only if the input mode is set to switch. When the input is of type button you need to use events for your automations. Event entities (generation 1) To change the name of your device, simply type in your desired name into the text box. FACTORY RESET Connecting your Shelly to its cloud allows you to control it remotely, receive notifications and updates about your devices. The default for this setting is for the cloud to be enabled. If you disable the device cloud support, you will lose connection to your device from outside its local network! Actions Set the motion detection threshold (from 1 to 256) using the slider. A lower value sets higher sensitivity. See motion detection percentage above of the slider as you move it.

In case device name and channel names are not set, the entity name will be generated by the Device Type, Device ID and Channel Number.

If Home Assistant is running as a virtual machine or service on an operating system other than Home Assistant OS, you should open UDP port 5683 on the device’s firewall and/or ensure that communication from this port is redirected to the Home Assistant service.

Here are a few more sensors i made using this method. But in this case these yaml example are placed under the sensor section in your HA config not the binary_sensor section like the example above. sensor:... If the Input Mode of the switch connected to the device is set to Button, the integration creates an event entity for this switch. You can use this entity in your automations. Events Change the current device name. This will reflect on the Shelly Device name in the application if the “Sync name” application setting is enabled. Factory Reset For battery-powered devices, the update platform entities only inform about the availability of firmware updates but are not able to trigger the update process.

Welcome

Green brief flash: Unreported motion detection (the Device is not connected, or motion detection is disabled) The Device can be managed and controlled through its embedded web interface too. Make sure Shelly Motion 2 is in AP mode. Open the Device Web interface at http://192.168.33.1 when connected directly to the Device access point. If Shelly devices are in a different subnet than the Home Assistant server, you should ensure communication on UDP port 5683 between these subnets. IMPORTANT: The device heats up during charging, which prevents it from measuring the room temperature correctly. 2. Starting