Joined in 2023 
82 
63 About this deal
This answer may vary, the faster the product is dried the faster the odor starts to dissipate. Keep in mind the more product that is sprayed the longer the odor might last. Spray only enough product to remove the stains, start off light then apply more as needed. Also keep in mind you can spray RMR Botanical right after to help greatly reduce the odor of the stain remover. The more air movement the better, fresh air can be added by a fan and this will speed up the drying time.
The RMR-86 Pro is our stronger, more aggressive mold and mildew stain remover than the original RMR-86. RMR-86 Pro does have a longer shelf life as well as utilizing its hybrid ultrapure sodium hypochlorite to remove even the deepest of stains without having to scrub. With this formula change you will even notice a difference in time that it takes for the stain to disappear. On average a 32 oz bottle covers about 125 square feet and a 1 gallon covers about 500 square feet. This can vary based on how liberally the product is applied. On appropriate surfaces (fencing, siding, outdoor surfaces, shower walls, etc.) thoroughly rinse or use a wet sponge. The RMR-86 has a very strong chlorine like smell which is why the full-face respirator is required.
Watch the Video
Cost - Saving Results: With no scrubb ing, sanding or blasting required, our penetrating formula can save you a fortune in labor costs. At least ten months of shelf life will make RMR - 86 PRO your go - to solution. RMR-86 is a ready to use formula, dilution is not required. If diluted the product may not be as effective. The RMR Odor-X Pro is formulated to leave no scent or fragrance behind only clean, crisp, fresh smelling air. There is a slight tracer scent in the product to help customers know where they have sprayed. The tracer scent disappears after a minute or two. Eliminate discoloration and the lingering odors mold and mildew usually leave behind. Treat porous surfaces like wood, concrete, drywall, grout and much more! It's a versatile product that substantially lowers cleaning and restoration costs.
The RMR-86 could potentially remove the sealant as well, so we recommend testing it on a small area first to see the results. If it does strip the sealant, you can reseal the wood after RMR-86 has dried. PPE is not required when applying the RMR Botanical. However, if you previously applied the RMR-86 and are applying the RMR Botanical right after, then you will want to keep the PPE on from applying the RMR-86. In addition, mold stain cleanup environments are already hazardous, and precautions should always be taken.
Once you’ve sprayed the RMR-86 and the stains have been removed, you can immediately start applying the RMR Botanical. The sooner the RMR Botanical is sprayed the faster the smell from the RMR-86 will start to dissipate. Not necessarily. If there is no mold present on or behind the insulation then you can keep the insulation there, but you do not want to spray the RMR-86 onto the insulation. If there is no way to cover the insulation, then it may need to be removed. A direct spray or fogging will get you the best results. Using a trigger sprayer on the bottle for small jobs, or a pump-up sprayer or an electric sprayer for larger jobs, as well as a cold ULV fogger. Using on a rag is also acceptable when applying the RMR Botanical.
On average a 32 oz bottle covers about 60 square feet and a 1 gallon covers about 200-400 square feet. This can vary based on the severity of the affected area, as well as how liberally the product is applied.Impressive Stain - and Odor - Busting Power: Powerful stain - dissolving ingredients are no match for even the most challenging mold and mildew problems. RMR-86 is Sodium hypochlorite-based, which can be hazardous without proper equipment and precautions. In addition, mold stain cleanup environments are already hazardous, and precautions should always be taken. Odor - Fighting Power: Say goodbye to gross, musky smells. RMR - 86 combats odors and leaves no trace of mold and mildew behind. Yes, once the area is completely treated and completely dry, it will be safe to repaint the area again if you desire. Ditch the hand - scrubbing, soda - blasting, and constant reapplications. If you want to get rid of mold and mildew stains once and for all, you need RMR - 86 PRO! CONTRACTOR - GRADE FORMULA
A direct spray is required for the RMR-86 to work properly. Using a trigger sprayer on the bottle for small jobs, or a pump-up sprayer or an electric sprayer for larger jobs. Using on a rag is also acceptable in some cases. Make sure you shake product vigorously prior to applying as well. The chemical resistant shield tech 55 is the best suit to use. Keep in mind, this is not a chemical proof suit so please always be careful when spraying the product. Spray ahead of yourself and work your way out of a confined area.Yes, RMR-86 can be used on shingled roofs, just be sure to be careful and covers grass, bushes and ferns to prevent the product from killing any plant life from over spray. We have found that if you thoroughly water the plant life surrounding the work area, before and after spraying RMR-86, it will protect most plant life. RMR Botanical is a ready to use formula, dilution is not required. If diluted the product may not be as effective. Under proper storage RMR-86 is scientifically designed to maintain its performance properties for a minimum of 6 months. Due to its chemical makeup, it will break down slowly after that and lose its strength. If, after a few moments, evidence of the stain still remains, a second application of RMR‐86 may be needed. Spray RMR - 86 on deeply stained surfaces to watch mold and mildew lift before your eyes! Our formula is safe for various indoor and outdoor materials, including concrete, wood, vinyl siding, bathtub tiles and more!
Great Deal 
New Comment