Ronseal QDWSNO750 750 ml Satin Finish Quick Dry Woodstain - Natural Oak

Product Information

It is specially formulated to evenly stain wood and dries to a natural matt finish in only 10 minutes. Test, Test, Test: It's crucial to test the stain on a scrap piece of oak wood or an inconspicuous project area to ensure you achieve the desired colour. Different types of oak, as well as environmental factors, can impact how the stain appears. Naturally, adjustments may be needed to achieve the perfect colouration. After wiping off the excess Wood Stain, you’ll need to wait for about 10 minutes for the stain to thoroughly dry. Once it’s dry, a second coat can be applied if desired; applied in the same way as the first.

If the subsurface does not absorb the wood finish uniformly, the colouration will be uneven. For an improved, consistent and matted surface, we recommend retreating the surface with [701 Clear]. Thereby glossy spots are matted and an even appearance is created.A Medium Oak Wood Stain is known to have a lighter natural brown undertone to it. Although we don’t have a Medium Oak Wood Stain in our range, we would recommend our Natural Oak Wood Stain as a great alternative. Transparent finishes allow the substrate to shine through. Depending on the wood species, the appearance of the colour tone may deviate from the original RAL/NCS colour tone. When using a paint to colour wood, you risk hiding the natural grain. Whereas a wood stain is designed to completely soak into the wood, stain it to your chosen colour and bring out the beauty of the natural grain in the timber.

Always test stain a small piece of wood to see how both the stain and wood will react. Have you ever tried a natural stain for wood? If so, what did you use? What were the results? In this article, we’ll dive into the different types of stains and finishes, discuss the best ways to apply them, and cover other essential factors that make your final product stand out. A. You shouldn’t sand wood after you’ve applied a Wood Stain. The wood should be sanded prior to staining. If the wood stain raises the grain of the wood, you can sand the wood and then restain. A. If the surface is dirty clean it first with a suitable Wood Cleaner. Otherwise, sand it with #100 Sanding Pad in the direction of the grain. If the wood is freshly sawn, you may need to start with something more coarse such as 120g sandpaper and work your way up with the Sanding Pads. Polyurethane: Polyurethane finishes are popular for oak wood for their durability and versatility. They come in various sheen levels, including gloss, semi-gloss, and satin. Polyurethane forms a protective layer on the wood surface, shielding it from moisture, scratches, and stains. It’s relatively easy to apply, and multiple coats can be added for increased durability.Grey wood looks classically beautiful, to allow the natural greying process to occur, apply [701 Clear]. If you are unsure of the wood stain colour, test it on an unseen area first. The stain can be applied with either a cloth, bristle brush, or for best results a Foam Brush. Apply the stain liberally going in the direction of the grain. Leave it to soak in for a minute or two and then wipe any excess of using a Lint Free Cloth.

Osmo Natural Oil Woodstain is furnished with biocides and therefore it is only to be used in outdoor areas. Achieving stunning stains and finishes on oak wood is a journey that requires careful consideration and attention to detail. A. Yes you can. Our Wood Stain has been designed to deeply penetrate all wooden surfaces. However, you’ll always get best results by giving the wood a light sand first with #100 Sanding Pads.If you compare the oak stained with Weathered Oak to that just rubbed with walrus oil (pretty close to raw wood look), you can see that weathered oak slightly deepens the color of the wood and increases the contrast between the lightest and darkest parts of the wood grain.