Sony MDR-ZX330BT Bluetooth Wireless Headphones with NFC Connectivity - Black

Product Information

Due to the characteristic of BLUETOOTH wireless technology, the sound played on this unit is slightly delayed from the sound played on the BLUETOOTH device during talking on the telephone or listening to the music. If the headset is not used for a long time, the indicator (red) may not light up when you connect the micro-USB cable to charge the headset. In this case, do not disconnect the micro-USB cable from the headset: wait a few minutes until the indicator (red) lights up. Use the supplied micro-USB cable only, and connect directly to a computer. Charging will not be completed properly by an indirect connection, such as via a USB hub. The headset can be paired with multiple devices, but can only play music from one paired device at a time.

After the computer has loaded the device and the drivers for the headphones, you should see that the device has been connected successfully. If your Xperia is currently connected to a Bluetooth device, the connected device will appear under ' Available Media Devices', as shown in the screenshot below. If pairing is not established within about 5 minutes, pairing mode will be canceled and the headset will turn off. In this case, start over from step 1. Bring the headset and the BLUETOOTH device closer together. Remove any obstacles between the headset and the BLUETOOTH device.NOTE: If the device name is not displayed in the Bluetooth items, there is a possibility that the Bluetooth function is set to off. Set the Bluetooth function to on.

NOTE: If the device name is not displayed in the Bluetooth items, there is a possibility that the Bluetooth function is set to OFF. Set the Bluetooth function to ON. For more information, visit the article: What’s the easiest way to pair my Bluetooth headphones with an Android phone?Listening with this headset at high volume may affect your hearing. For traffic safety, do not use this headset while driving or cycling. If you have previously connected the headset to this BLUETOOTH device, only an HFP/HSP BLUETOOTH connection may be made when the headset is turned on. If this happens, use the BLUETOOTH device and make an A2DP BLUETOOTH connection. Alternatively, search for 'Bluetooth' using the search tool located in the taskbar, as shown in the screenshot below. The above procedure is an example. For details, refer to the operating instructions supplied with your BLUETOOTH device. Type your search word (e.g. ‘Bluetooth pairing’) in the search bar in the top left-hand corner, as shown in the screenshot below.