Mapei 113 UltraColor Plus Cement Grey Grout 2kg

Product Information

Mapei Ultracolor Plus is suitable for grouting walls and floors in areas that are subject to intense traffic, such as shopping centres, airports, restaurants and other public spaces. It is also suitable for residential use in all areas, such as facades, balconies, terraces and swimming pools. Kerapoxy Easy Design does not guarantee a perfect bond when used as a grout if the edges of tiles are wet or contaminated with cement, dust, oil, grease, etc.

Applications for this product include: Grouting floors and walls in areas subject to intense traffic (airports, shopping centres, restaurants, bars, etc.) / Grouting floors and walls in residential areas (hotels, private houses, etc.) / Grouting floors and walls on façades, balconies, terraces and in swimming pools. After the finishing operation, it is very important that no traces of Kerapoxy Easy Design remain on the tile surface. Once Finishing: When the mix loses its plasticity and becomes opaque, which usually takes place after 15-30 minutes, clean off the excess Ultracolor Plus with a hard, damp sponge (e.g. a MAPEI sponge), working in a diagonal direction to the joints. Rinse the sponge frequently, using two different containers of water: one to remove the excess mix from the sponge, and the other, containing clean water, to rinse the sponge. This operation may also be carried out with a machine with a sponge belt or rotating disc. When the mix is partially set, after 50-60 minutes, a damp Scotch-Brite® sponge or an abrasive felt disc may be passed over the joints to even out the surface. Use a flexible sealant from the MAPEI range (such as Mapesil AC, Mapesil LM, Mapeflex PU 40, Mapeflex PU 45 FT or of a 3 kg drum of Kerapoxy Easy Design), powder pigment based on very high-quality pearlescent mica, to create a

After grouting with Kerapoxy Easy Design, floor and wall coverings must be cleaned while the grout is still “fresh”. Kerapoxy Easy Design allows to create floors, walls, worktops etc. in compliance with the HACCP system and the Given that Mapecolor Metallic is extremely fine and volatile, it is recommended to use and mix the product in exterior, in

Delivery charges vary for the following postcodes and will be delivered between 5-7 working days to the following postcodes: GY, HS, IM, IV41,IV30, IV42, IV44 – 49, IV55, IV56, JE, KA27 – 29, KW1 – 14, KW15 – 17, PA21 – 38, PA20, PA40+, PH9, PH15 – 20, PH32 – 44, PH49, PH50, TR21 – 25, ZE. Kerapoxy Easy Design is a two-component, epoxy resin-based decorative grout, with glass micro-spheres and otherIf the cleaning operation is carried out too soon (the mix is still too wet), some of the mix may be removed from the joints. If grouting is carried out in extremely hot, dry or windy weather, we an area protected from draughts. Interior use may cause the product dispersion in the environment and its deposit on Mapei Ultracolor Plus creates water repellent grout joints that have excellent colour uniformity. All colours are resistant to UV rays and atmospheric agents. the aesthetic effect desired, within the limits described above (up to 6% for MapeGlitter, 3% for Mapecolor Metallic so that

From our carrier you will receive a text message on the day of the delivery with a 2 hour delivery window. If there any changes or delays you will receive an update via text.The use of a Scotch-Brite abrasive pad instead of the traditional cellulose sponge for cleaning joints is recommended in

UltraCare Kerapoxy Cleaner can be used both immediately after grouting and after completing laying work. After mixing the two components as described above, spread the adhesive on the substrate using a suitable notched Add Mapecolor Metallic after mixing the two components of Kerapoxy Easy Design (A+B). Create a hole in the paste certified according to ISO 22196:2011 as a grouting mortar protected against the formation and proliferation of microorganisms. trowel. Firmly press the tiles/mosaics into the adhesive bed to guarantee good adhesive transfer. Once set, the bond isPreparing the mix: While stirring, pour the Mapei Ultracolor Plus Grout powder into a clean, rust-free container containing 21-23% by weight of clean water. Mix the grout with a low-speed mixer to avoid air entrainment, until a smooth paste is obtained. Let the mix stand for 2-3 minutes, and stir again briefly before use. Use the mix within 20-25 minutes of its preparation. Repairing existing degraded grouts by removing all loose areas and to a minimum uniform depth of 3 mm.