Grip Rite 16DUP1 1 lb Bright Double-Head Shank Duplex Nail, 3"

Product Information

Due to their thin shank, box nails are not recommended for structural builds because they don’t have the strength to hold two pieces together. Paper Collation - Paper is a commonly used wrapping for framing nails, usually tilted at an angle of 30 to 34 degrees. Paper collation comes with the advantages of being inexpensive and environmentally friendly. William Arthur Collings of Missouri received a patent for the Duplex Nail in 1917. His description detailed how the double-headed nail was ideal for use on concrete forms because it was easy to remove compared to regular nails, without damaging the forms. Although the purpose of nails is simple, choosing the wrong size can ruin your project. That’s why you need a nail size chart. Panel pins are smaller, fine gauge nails used for fine or delicate woodworking jobs. Attaching moulding or a veneer is the perfect job for panel pins as they do not hold much strength but are extremely neat.

The entries for types of nails give the number of nails per pound for each size. From this information and the number of nails needed, the number of pounds required can be calculated. Finish

Some specialty nails are made of other metals, though they are not common in home construction. For example bronze nails are often used in the construction of boats while iron nails are still produced, but they are mostly used for the restoration of historic buildings. Coatings The D in nail sizes indicates “penny,” and they’re pronounced as such: 10D is pronounced “ten-penny.” Originally, the term indicated how many pennies a carpenter would have to pay for 100 nails of a specific length. The longer the length, the more pennies they’d have to pay for the lot. Oxidation, or rust, is the enemy of any nail which will be exposed to elements like rain or humidity. Galvanization itself is actually a simple act, in which the steel nails are either electroplated or dipped into a molten zinc mixture to give the required coating. When driving in a panel pin, it is common practice to use a punch to drive the head below the surface of the wood. This allows more gripping strength and the ability to neatly seal over the nail.

The only difference is that vinyl also works as a lubricant, which helps in the installation process as the nail drives in more smoothly. Zinc Drywall nails are often coated with phosphate, which increases the gripping power of the nails. (Note: phosphate coated nails should not be used on treated lumber.) Cement The nail size charts below illustrate industry standards for nail sizes and their dimensions. Under “nail size,” the “penny size” (aka, pennyweight) refers to a standard nail unit. Nails are measured in pennies, believed to be from older times when nails were sold by the penny. At the time, the abbreviation for pennies was d, so nail sizes are described as 2d nails, 3d nails, etc. So a 16 penny nail is also described as a 16d nail, and 8 penny nails are abbreviated as 8 d nails. Pennyweight does not correspond exactly to nail weight, gauge, or other measurements, however; for example common 10d nails are 3" long with a 5/16" head diameter and a 9 gauge shank.

Roofing Nails

The main reason you may want to use an aluminum nail is that certain woods could have a negative reaction to the zinc coating on galvanized steel nails. Aluminum nails do serve a very important function where steel or copper cannot be used, but are best reserved for those instances only. Panel Pins Ten-penny (10D) nails are typically used for building header assemblies and framing walls. Their 3-inch length means they can punch through two 2x6s, 2x8s, or 2x10s with a ½-inch piece of plywood between them (a header sandwich) without poking through the other side. They may also be used for non-loadbearing walls. Why don’t structures fall down or come apart? Learn all about the stuff that holds building materials together in the MT Copeland online Fasteners and Adhesives course. Taught by professional builder Jordan Smith, the course covers topics ranging from nails and screws to glues and epoxies. 12 Types of Nails Used in Construction