20 Pack RJ45 Cat6a Cat6 Connector for 23 AWG Gold Plated 8P8C Pass Through Shielded Modular Ends Plug

Product Information

There it is. Pretty easy to do, once you have a couple goes at it. Keep in mind that terminating an RJ45 plug is part science and part art. If you are new to this, practice on scrap cable and buy enough plugs just in case you make bad terminations. Trust me, I have made my fair share of bad terminations over the years. Practice makes perfect. Once you have terminated both ends of your cable run, it is time for testing. There are a number of tools to accomplish this, and the easier and more informative the test is, the more expensive it will be. Take a look at this blog for tips on dealing with issues: Basic Network Cable Troubleshooting: What Did I Do Wrong? Buy more connectors than you need. It is wise to test terminate (crimp) the connectors onto the cable to make sure you can work with them. In addition, if you make a bad crimp then you can simply use any extras. Even the most experienced installers make a bad crimp from time to time.

if the cable I am working with has a metal ground wire, am I required to use a shielded rj45 connector. This will only be a gigabit network, so I don't need the full speeds a cat6a cable will give me. In theory there is no functional reason why a Cat5e end couldn't be used on a Cat 6 cable and vice versa, clearly the combination of Cat6 cable and the Cat6 end is the optimal choice if available. Remove the cable shield carefully, followed by the waterproof tape - it may take several cuts. Don’t accidentally cut off the drain wire. If you are new to this kind of activity, then practice as much as practical. The more terminations you make, the better you will get. If the plug is 2 prong or 3 prong. 3 prong plugs will work with stranded and solid copper conductors. 2 prong plugs work with stranded copper only.Just bought yourself a nice outdoor surveillance camera or Wi-Fi Access Point? You have to hook that thing up somehow, and the only way is to attach a RJ45 plug to the end of an Ethernet cable. But...how? There is a lot of confusion and misinformation out there regarding the termination of shielded bulk Ethernet cable to shielded plugs. Horror stories abound about how difficult it is. Actually, it is not that difficult once you know how to do it and what to buy. Welcome to the right path! Let’s take a dive into this process of how to terminate Cat6 cables, where I will show you how to do it correctly.

Grab your RJ45 crimp and termination tool. Place the plug into the tool (it will only go one way). Continue placing pressure on the cable and plug by pushing lightly into the tool cavity. At the same time, press the lever downward in one smooth motion. This single step does one thing only: Written by Don Schultz, trueCABLE Technical Sales Representative & Fluke Networks Certified Technician Never attempt to create an Ethernet patch cable by using hand crimped RJ45 plugs on both ends when using solid copper Ethernet. Buy factory pre-terminated patch cords for this purpose. If in a pinch, use field termination plugs at both ends when seeking to create a patch cable using solid copper bulk Ethernet cable.

If you don't required shielded cabling, not connecting the earth will not affect the function of the cable. Shielded plugs are different again as they have a metal coat to ensure end to end earthing of the cable. So, armed with those requirements we would need to choose the trueCABLE Cat6/6A Pass-Through RJ45 connector (if you wish to use pass through). The bonus benefit of staggering conductors is reduction of crosstalk. As Ethernet cable frequency exceeds 350 MHz, crosstalk starts to become an issue of particular concern. All the better if the plug’s physical design also reduces the crosstalk phenomenon. Thanks all for the valuable information, every single post helped me, and a special thanks to @BrianWhelton for the fast extensive knowledge, answers, videos and pictures!!

All lined up in T568B sequence. Once lined up then flush cut. Keep the conductors lined up at all costs during this process. Easy does it. Practice makes perfect. S traighten the conductors as best as possible, without damaging them. This is an easy one. If the cable is shielded, you will want to use shielded RJ45 connectors. Conversely, if the cable is unshielded, then use unshielded RJ45 connectors. Using a shielded connector on an unshielded cable will yield no benefit, assuming the fitment is correct to begin with (and likely it won’t be). Shielded connectors are typically “up size” in nature, and usually won’t make proper electrical connections with thinner unshielded Ethernet cable conductors. Another item of note is using shielded RJ45 connectors on unshielded Ethernet cable is bad form as it may mislead someone into thinking the cable is also shielded. Just to confirm a summary of my understanding for this "best endeavor job" :).... I assume my summary is right if I don't get corrected (confirmation is welcomed!) The next step is to flush cut the conductors so they go into the load bar evenly. Carefully, while keeping the conductor color sequence correct, “choke” upward the conductors to remove about 0.75 inch. Flush cut straight across.The connector is unshielded, and so not suitable for use in environments where EMI interference is a concern. Cat6A speed is at least 500 MHz. This allows 10 Gbp/s (Gigabits per second) up to 328 feet (100 meters). Cat6 max speed is 250 MHz. Therefore, it only supports 10 Gbp/s to 165 feet (55 meters) under ideal conditions—less in heavy cross talk environments. You’re installing the cable where it would be cost prohibitive to re-run higher specification cable even in the distant future. Don’t Forget Cat6A cable installation is very different from Cat6 cable installation cost. When installing Cat6A ethernet cable to achieve 10 Gbp/s speed, the increase in costs is not only from the cabling. Extra costs are due to the need for higher performance switches and additional networking hardware. A single piece of network infrastructure, like cable, cannot be upgraded to Cat6A specification and give you faster speeds. That is until the entire network infrastructure is upgraded.