Rycal Block Paving and Concrete Sealer 20Ltr

Product Information

New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . The information given in this product data sheet is given in good faith, based on current knowledge and experience.

Solvent based clear acrylic sealer, protects and enhances new or old concrete, block paving or recently cleaned paving. Allow to dry thoroughly (a minimum of 3-4 days of completely dry weather) and re-apply jointing sand prior to sealant application. This is because unlike cheaper water-based alternatives, our brick driveway sealant provides genuine long-term protection. This coverage ratio will saturate the sand deeply within the joints, not only stabilising the paving but reducing the risk of weed growth. If you are looking for a more wet look finish our sealer for block paving in the gloss finish is the right product for you.We weeded, jet washed and re-sanded the driveway first and then rollered 2 coats of the sealer on to the driveway. This is a rough estimate and varies depending on the condition of the driveway and the amount applied with each coat. AdSeal Block Paving and Concrete Sealer SP works equally well for sealing block paving, slabs or imprinted concrete.

I have only had this finish completed a few weeks, the rich thickness and texture indicates a solid product for what I needed. It will repel water, oil, fuel and dirt of all kinds to prevent surface staining and weather damage. Solvents are released during the cure that normally permeate through the sealer, however if the sealant is applied too thickly, the substrate is damp or cold, blooming may occur giving the appearance of milky white or silvery cloud effect, this may look patchy, spotty in certain areas or across the whole driveway or patio.Ensure all surfaces to be sealed are clean, dry and free from oil and grease and there are a couple of days of good weather so there is no chance of rain during application.

When preparing block paving prior to sealing it is important that not only is the surface of the pavers clean, but vital that the joints have been cleaned properly.Smartseal sealers are designed to help minimise maintenance for the homeowner but as with all paving products, some degree of routine maintenance is necessary to prevent build-up of moss, weeds, stains or algae growth.

Applying the coats in thin fully rolled out coats will prevent any issues and speed up drying times. When applied to pavers jointed with brush-in compounds you will require less product as the joint does not need solidifying.

All work should be carried out in conjunction with the manufacturers current technical data sheet and instructions for use. Some sealants may impart a glossy, wet look that isn’t always to everyone’s taste and some products may not be suitable for your particular type of paving.