Magigoo – The 3D printing adhesive, MO2016

Product Information

Magigoo is an easy to use 3D printing adhesive designed to address "the first layer not sticking problem". Magigoo PRO PPGF is the stronger cousin of Magigoo PP, offering stronger adhesion for the stiffer reinforced polypropylene blends. Certain manufacturers have improved the printability of PC by the use of plasticizers or blending with other materials. Original Magigoo works with the most common 3D printing materials such as: PLA, Tough PLA, BVOH, PVA, ABS, TPU, and PET-G.

The Magigoo PCGF is the ideal adhesive to combine with the advanced filament XSTRAND GF30-PP and achieve pieces without problems of adherence to the base and remove them easily. In our assortment, you will find over 130 different filaments in both traditional and original trendy colors. Da hilft auch der Hinweis im Beipackzettel nicht, die Flasche gaaanz vorsichtig zu drücken, wenn das Zeug nur widerwillig aus der Flasche kommt. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. Whether you’re a hobbyist or a professional, experiencing a 30-hour print without any warping and easy release is incredibly satisfying.Einziges "Problemmaterial" bislang: GreenTec Pro (so eine Art SuperPLA mit einer Erweichungstemperatur >100°C).

However, having a high Tg can make it very difficult to print using desktop printers, as these are usually not equipped to cater for the high printing temperatures required to print virgin PC. This means that the expensive sheet needs to be removed very often and also incurs a lot of post processing and cleaning. Magigoo PC ensures that prints stick firmly when the print base is hot and that the part is easy to remove once it cools.Easy-release: adhesive properties are designed to release the 3D print once the build plate has cooled.

The Magigoo 3D Printing Adhesive comes in a wide felt tip pen form making it easy to apply to the 3D printing surface. Just shake it like you mean it, press the nib against the build plate and get Magigoo flowing and spread it in a thin layer. The Magigoo PP is designed to be used exclusively with Polypropylene filaments ( PP, XSTRAND GF30-PP). Magigoo: tips and tricks Magigoo® is a water-based adhesive intended to be as safe as possible to use, recommended for 3D printing with BCN3D printers.In addition once a 3D print adheres well and prints successfully, it is vital to get it off easily without damaging the end result or the printer. But not only works effectively with these materials, it has shown good results also with HIPS and PET-G. That is why we are not afraid to guarantee the highest quality of our filaments, the accuracy of their colors, and trouble-free printing.

The opposite occurs to other flexible filaments, their adhesion is so high that it may be the case that it is impossible to detach the piece from the base. But the magic starts when printing is ready: just wait for the plate to cool down and then remove your prints with just a finger flick!Magigoo PC makes this much easier and allows for nearly effortless printing of PC and PC/ABS filaments.