UJK Bandsaw Buddy

Product Information

Heard many say that a non issue, my saw is tippy on a good day, tried swapping my base end for end with no luck. The fence is mounted to the table solidly and aligned to the miter track, not designed for adjustment. I realize that this set of steps is meant for resaw bandsaw setup, but the steps have always resulted in everything being setup properly including both the blade squareness to the table and the slot.

The table adjustment procedure is to loosen not remove these bolts, tap the table into the desired alignment position with a mallet, then tighten the bolts. long aluminum rule with four rare-earth magnets fastened to one side and a space next to the magnets for the bandsaw’s blade. The holes along the length are simply an easy way of drawing circles at set radii and nothing to do with the aligning of the blade. This visibility then allows alignment of the fence and miter slot with the blade, and the built-in rule also makes it easy to set the fence an exact distance from the blade for saw cuts. The Bandsaw Companion tool from iGaging has two rare earth magnets on one side, which attach it firmly to the blade, best on 1/2" and wider blades.

This will vary with how completely you use the tool as in the case of many 14" 'do it all' machines versus dedicated curvy-cutters and ripping bandsaws. or wider works best), loosen the table bolts (keep one snug as a pivot point), and align the blade and miter slot using a finely graduated ruler. Please dont even think about lifting this off the bed until it is completely cold as it will warp like mad rendering it useless. It won't work on any blade smaller than 1/2" and you must remove the sliding stop prior to putting it on the blade. As best I can tell, they sit on the bandsaw behind the teeth, so removing any inaccuracy of a square running acros the blade and the offset of the teeth.

It also has a couple of magnets on it midway so you can stick it to a bandsaw blade to help align your fence. The Bandsaw Companion tool answers how to get the blade, miter slot, and fence parallel to each other to eliminate drift.With its graceful curves, cabriole legs, and ornamental back splat, a Queen Anne side chair is a bucket list build for many woodworkers. Due to the convex running surfaces on the rollers, the saw band is distorted depending on the tension and settings. This way a person could move the pin to the opposite end of the ruler when using it as a stop ruler.

Turns out trying to level a machine like this for troubleshooting, you need have the thing in the middle of the floor. If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag.I set my wheels co-planer, I flutter tension my blade, I align my miter slot (table) with the blade. If the table is off either because it was not properly aligned when originally installed or knocked out of alignment when moved or in use then that needs to be corrected. All the gizmos and gadgets are a waste of time and money IMOI agree the gizmos and gadgets are a waste but you are assuming the able is properly aligned and the blade is good. Once this is done I don't have to adjust anything except the tension and the guides when changing blades .

It’s often overlooked, but a critical step in setting up a bandsaw is adjusting the table parallel with the blade. And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests. Timbecon is passionate about reliable and affordable products that will get you into woodworking today. Finance is provided by PayPal Credit (a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH).

With holes spaced every half-inch, you can also use the tool as a compass to draw circles up to a 23" diameter for bowl blanks. As mentioned, blade wear or use beyond the reliable life of the cutter will result in tracking issues and there are all sorts of ways (including an expensive fence) to handle that until your new blade arrives.