Decking Rescue Paint 2.5L Deep Blue [39147]

Product Information

Galvanised Steel – Once you have treated the galvanised steel with Mordant Solution (T-Wash) you will need our Metal Primer.

A low sheen finish strongly repels water and includes UV stabilisers to slow damage to the deck and coatings . I'm building a 1/350 USS Birmingham from Very Fire and the manual indicates that I need some deck blue. Browse our collection of decking paint, stain, and oil here and choose the colour and finish that suits your garden.Yes you can thin with water, preferably distilled water, As I also 'made the mistake of doing when I started to use them. Step 3 Prime – This step is down to personal preference, depending on the condition of the existing paint or if you are changing a dark colour to a light you may want to add one coat of primer.

Recommended use : As an intermediate and finishing coat in anti-slip systems on interior and exterior surfaces above water-line. Decking paint helps protect your wood, so you can enjoy sitting out on your decking year after year. Obviously since paint varies in consistency, it's difficult to give exact ratios of thinner/paint, you have to experiment until you find the right ratio. For any parts that has rusted you will need to sand the rust back to the bare metal and spot prime with the appropriate primer. A ready mixed coating containing special coarse aggregates which provide an anti-slip coating to a wide range of surfaces.

TWO PACK EPOXY RESIN MARINE BOAT DECK PAINT: Two part epoxy based resin with a High Quality Durable finish. These charges are solely dependent on your local customs office and the courier, we have no control over these charges. If you are using an airbrush, never thin in the cup - use an external pot - I use plastic shot glasses - it's easier to gauge the consistency, and if something does go wrong, you can ditch the glass. You will find that these kind of substrates will be porous, we recommend that on your first coat thin by 20% to ensure it impregnates the substrate.

When thinned with the correct thinner after a day it had cured 100%, was hard and had a much better finish.Valid forms of ID are EU Passports, EU Photocard Driving Licence, MOD Form 90 ID Card, EU Member State National Identity Card, “PASS” ID Cards. This non-slip coating can be applied by brush or short/medium roller and has a coverage of 6 to 10m² per litre. Thin the first coat by 10 percent with T0001 if painting wooden surfaces, to assist good absorption. The most cost effective way and ease of application is on your first coat apply standard smooth paint and then after 12-24 hours apply the second coat non slip.